Individual SWMS

Dry and wet abrasive blast cleaning of steel, concrete and masonry with a pressure pot, hose and nozzle: set-up, blast cleaning, operational cleaning and shut-down.

Removing coatings, rust or contaminants using high-velocity abrasive media in booths, enclosures or on open sites, including media handling and clean-up.

Removing coatings, rust or contaminants using high-velocity abrasive media in booths, enclosures or on open sites, including media handling and clean-up.

Removing coatings, rust or contaminants using high-velocity abrasive media in booths, enclosures or on open sites, including media handling and clean-up.

Surface preparation and protective coating of steel, concrete and masonry by abrasive blast cleaning, mechanical and water preparation, and coating application.

Servicing and repair of air conditioning systems including diagnostics, live electrical testing, refrigerant recovery, component replacement and coil cleaning.

Installing card, fob and PIN readers, electric strikes, magnetic locks and door controllers on internal and external doors, including fire and emergency egress doors.

Acoustic and vibration control in plant rooms, roofs and occupied buildings - surveys, isolators and inertia bases, louvres and attenuators, linings and enclosures, floating floors, panels, duct lagging and pipe isolation.

Installing acoustic louvres, duct attenuators, silencers and plenum linings on roofs, in plant rooms and in duct runs - lifting and positioning heavy units, fixing to structure and ductwork, sealing and flashing.

Noise and vibration measurement and site assessment before installation - readings in plant rooms, on roofs and in occupied spaces, structure and services checks at fixing positions, plant weights and access routes.

Installing acoustic wall panels, ceiling panels, baffles, rafts and absorbers in occupied buildings, studios, halls and offices - framing, fixings, suspension systems, cutting and finishing panels at height.

Installation, loading and removal of Acrow props and temporary propping for structural support during demolition, renovation and construction.

Installation, loading and removal of acrow props and temporary propping for structural support during demolition, renovation and construction.

Installation, loading and removal of acrow props and temporary propping for structural support during demolition, renovation and construction.

Use of adhesives, lacquers, stains and two-pack finishes in a joinery workshop - mixing, brush and spray application, booth operation, curing and waste disposal.

Use of adhesives, primers, lacquers, clear coats and two-pack finishes in the sign shop - mixing, brush and spray application, booth operation, curing and waste disposal.

Cleaning commercial and office premises alone or in small crews outside normal business hours, including building access, check-in/check-out and duress arrangements.

Operation of air compressors and pneumatic tools - nailers, breakers and impact tools - including hose management, stored pressure and receiver maintenance.

Recovering, evacuating, charging and leak-testing vehicle air conditioning systems, including flammable and high-pressure refrigerants, under an ARCtick licence.

All HVAC&R work including split and ducted installation, service, repairs, refrigerant handling and recovery, where a task-specific SWMS is not required.

Installation of split and ducted air conditioning systems including indoor and outdoor units, refrigerant pipework, drains, electrical connection and commissioning.

Installation of split and ducted air conditioning systems including indoor and outdoor units, refrigerant pipework, drains, electrical connection and commissioning.

Servicing and repair of air conditioning systems including live diagnostics, refrigerant recovery and recharge, component replacement and coil cleaning, often at height on roofs and in ceiling spaces.

Installing and configuring alarm control panels, motion, door/window and glass-break detectors, sirens and back-up batteries in new and existing premises.

Installation of aluminium window and door frames, glazed units and hardware in commercial and residential fitouts.

Installation of aluminium window and door frames and hardware in commercial and residential fitouts.

Installing fall-arrest anchor points and horizontal static lines on roofs and structures to an engineered design - the roof access to install them, fixing, proof loading, certification and handover.

Installing fall-arrest anchor points rated for fall arrest to AS/NZS 1891 and horizontal static lines on roofs and structures, including the roof access needed to install them.

Installing fall-arrest anchor points rated for fall arrest to AS/NZS 1891 and horizontal static lines on roofs and structures, including the roof access needed to install them.

Workshop and field repair of electrical appliances and equipment including diagnosis, component replacement and testing.

Workshop and field repair of electrical appliances and equipment including diagnosis, component replacement and testing.

Installing, commissioning and servicing gas appliances - cooktops, ovens, heaters, hot water units and boilers - location, ventilation and flues, burner pressure and combustion, carbon monoxide and spillage testing.

All arboricultural works including pruning, removal, climbing, elevating work platform (EWP) access, rigging, sectional dismantling, chainsaw operations and chipping where a task-specific SWMS is not required.

Applying architectural surface film and wrap to suitable doors, panels, counters and joinery: cleaning, preparation, cutting, application and heat forming.

Identifying and working around asbestos, lead paint, synthetic mineral fibre and other hazardous materials found when stripping out an older retail tenancy.

Awareness-level controls for workers who may encounter asbestos-containing materials - identifying likely ACM, using the asbestos register, never disturbing suspect material and reporting it before work proceeds. This SWMS does not authorise removal.

Awareness-level controls for workers who may encounter asbestos-containing material (ACM): identify likely ACM, check the register, never disturb it and report it. This SWMS does not authorise removal.

Work in confined spaces where asbestos-containing material (ACM) is present (pits, ducts, voids treated as confined, plant), combining confined space entry controls with asbestos controls.

Assessment, excavation and handling of soil containing or suspected to contain asbestos or other contamination - classification, wet handling, stockpiling and disposal.

Assessment, excavation and handling of soil containing or suspected to contain asbestos or other contamination - classification, wet handling, stockpiling and disposal.

Identifying and working around asbestos-containing material in pre-1990 houses - fibro wall and subfloor sheeting, infill panels, eaves, flues and loose fragments in the soil - and arranging licensed removal.

Licensed removal of non-friable and friable asbestos-containing material (ACM) by a licensed removalist - notification, containment, controlled removal, decontamination, air monitoring, waste handling and clearance. Class B for non-friable over 10 m2; Class A required for any friable.

Removal and handling of 10 m2 or less of non-friable (bonded) asbestos-containing material (ACM) by trained competent workers - the threshold for unlicensed removal of non-friable (bonded) ACM in most jurisdictions. Friable material is excluded.

Transport and disposal of wrapped asbestos waste from work sites to licensed facilities, keeping packaging intact and loads secured and documented.

Transport and disposal of asbestos-contaminated soil and wrapped asbestos waste from a remediation site to licensed facilities, keeping loads lined, covered, secured and tracked.

Overarching SWMS for the full asbestos scope where a dedicated task SWMS is not in place - identification and assessment, control planning and notification, non-friable (Class B) and friable (Class A) removal, decontamination, clearance, transport and disposal.

Laying hot mix asphalt using a paver and screed including truck docking, hopper operations, screed adjustment, hand work behind the paver and coordination with rollers.

Asphalt works including cold planing/profiling of pavements, laying and compacting hot mix with paver and rollers, and repair and reinstatement of trafficked surfaces.

Assembly of cabinetry in the workshop - dry fitting, glue-up and clamping, driving fixings, and installing hinges, runners, handles and lifting hardware.

Planned manual transfers - bed to chair, chair to toilet, sit to stand, walking support and repositioning - performed solo or two-person per the participant's support plan.

Fixing shade sail brackets and cables to existing walls, fascias, roof structures and posts, including checking that the structure can carry the load and drilling into masonry, steel and timber.

Installation of audio visual equipment including displays, projectors, speakers, video walls and suspended rigging at events, with working at height and electrical connections.

Servicing, repairing and adjusting automatic sliding, swing and folding doors and their operators - isolation, header and track work, drive and belt work, sensor and safety device testing and return to service.

Vehicle servicing and repair in the workshop and at the roadside - hoists and jacks, driveline and brake work, electric and hybrid high voltage systems, air conditioning, tyres, welding and fluids.

Applying primers and membranes to balconies, terraces and external above-ground surfaces in accordance with AS 4654.

Waterproofing of balconies, podiums, planter boxes and external decks, including membrane application, detailing, screeds and protection layers, with work at the building edge.

Installing balustrades, handrails and stairs on decks and outdoor structures, including fixing into structure, glass and steel balustrade panels, and protecting the open stairwell or deck edge before installation is complete.

Installing residential and commercial battery energy storage systems - brackets and enclosures, module mounting and interconnection, battery management, DC cabling and isolators, labelling and barriers to the standard.

Responding to a battery fault, alarm, damaged module or thermal runaway during installation, service or a call-out - the signs, evacuation, isolation from a distance, the fire service, re-ignition and making safe.

Receiving, transporting, storing, handling and disposing of lithium and lead-acid battery modules and cabinets - dangerous goods carriage, damaged modules, lifting and stair moves, quarantine and recycling.

Battery energy storage and off-grid power - site assessment and battery location, module handling, battery and inverter installation, stand-alone systems, switchboard and grid work, commissioning and emergencies.

Servicing and repairing electric and hybrid vehicles - de-powering the high voltage system, working near orange cabling and the traction battery, and handling damaged or thermally unstable batteries.

Applying tanking membranes to below-grade walls, retaining walls, lift pits and basement structures within excavations.

Templating, delivery to room, on-site adjustment and installation of natural stone and other permitted benchtops in kitchens, laundries and joinery.

Installing counters, benchtops and splashbacks, and the restrictions that apply to engineered stone when it is installed, removed, repaired or modified.

Placing, marking, servicing and removing skip bins on footpaths, driveways, nature strips and roadways, including council permit conditions and the pedestrian and vehicle interface.

Repair, washing and maintenance of bins and the depot yard - bin and vehicle washing, welding and repair, bin stacking and storage, yard housekeeping and waste segregation.

Receiving, storing, decanting, mixing and disposing of polyurethane binders, primers, pigments, solvents and trowel cleaners used in wet-pour and tile work.

Cleaning up blood, vomit, urine, faeces and other body fluids in participants' homes and vehicles, including contaminated surfaces and disposal.

Cleaning, decontamination and forensic restoration of areas affected by blood, body fluids, sewage, unattended deaths and trauma scenes after police release.

Cleaning, decontamination and forensic restoration of areas affected by blood, body fluids, sewage, unattended deaths and trauma scenes after police release.

Bird management including netting, spikes, shock tracks and trapping, and rodent control including baiting, trapping and proofing, with work at height and droppings clean-up.

Spray sealing operations including heating and transferring hot bitumen, LPG burner operation, tanker and sprayer work, spray runs and aggregate spreading on live road corridors.

Operating an enclosed blast cabinet in a workshop: loading parts, blast cleaning through the gloves, media reclaim and dust collection, and isolating the cabinet.

Servicing, repairing and fault-finding on blast pots, compressors, hoses, nozzles, breathing air equipment, extraction units and spray equipment.

Overarching SWMS for blinds, awnings and window furnishings work - measuring, installation, motorisation and fixing into masonry - where no task SWMS is in place.

Clearing a blocked pipeline, relieving stored pressure, cleaning out the line with water, air or a sponge ball and recovering the ball at the line end.

Reactive call-outs to blocked and overflowing drains at unfamiliar premises - arrival assessment, lone and after-hours work, sewage overflow control, clearing by jetter or eel and making safe, often alone.

Clearing paths, lawns and hard surfaces with backpack and handheld blowers, sweeping and final site clean-up.

Recovering bogged or immobilised vehicles and plant using snatch straps, winches or tow recovery on civil, rural and earthworks sites.

Recovering bogged or immobilised vehicles and plant using snatch straps, winches or tow recovery on civil, rural and earthworks sites.

Installation of bollards, wheel stops, speed humps and tactile ground surface indicators (TGSIs) in pavements, car parks and walkways.

Identifying overhead power lines at every pump set-up and keeping the boom, pipeline, hose and crew outside the clearance the network operator specifies while slewing and placing.

Placement of concrete by truck-mounted boom pump or static line pump, including set-up, priming, pumping, line moves and washout.

Drilling bored piers for new stumps, piers and underpinning with an excavator-mounted or rig-mounted auger beside an existing house, including spoil management, bore protection and open-bore inspection.

Drilling bored piers with auger and bucket tools including temporary casing, spoil management, bore protection and inspection of open bores.

Boundary and cadastral survey on private and public land - researching and locating survey marks, exposing marks by hand, working around occupants and animals, and reinstating what is disturbed.

Inspecting, cleaning, machining and replacing brake pads, shoes, discs, drums, calipers and lines, and bleeding hydraulic systems, on cars, vans and light trucks.

High pressure and chemical cleaning of brick, stone, render and masonry surfaces, including efflorescence, mortar-smear and paint removal using acid-based and alkaline cleaners.

Acid cleaning of new brickwork and raking, repointing and repair of mortar joints, including heritage work, controlling acid, silica and fall hazards.

All bricklaying and masonry works including setout, mixing, laying bricks and blocks, cutting, scaffold work and cleaning, where a task-specific SWMS is not in place.

Bricklaying and blocklaying including mortar mixing, laying bricks and blocks, cutting, working from scaffolds and cleaning down.

Bricklaying and blocklaying - mortar mixing, laying bricks and blocks, cutting, working from scaffolds and cleaning down.

Brushcutting and edging around obstacles, fence lines, garden beds, paths and verges with line trimmers and edgers.

Operation of permanently installed building maintenance units for facade access - pre-use checks, cradle operations & emergencies.

Operating a permanently installed building maintenance unit and cradle for facade access, including pre-use checks, cradle operations and emergency descent.

Bulk earthworks and excavation using mobile plant to cut and fill large volumes of soil, including set-up, excavation, haulage and reinstatement.

Bulk earthworks and excavation using mobile plant to cut and fill large volumes of soil, including set-up, excavation, haulage and reinstatement.

Excavating and loading contaminated soil and fill inside the exclusion zone - dust, vapour and odour control, excavation stability, plant and pedestrian separation, unexpected finds and plant decontamination.

Managing bulk soil, sand, gravel, crusher dust and mulch in bins and stockpiles - forming and drawing down piles, bin wall care, loader work, dust control and organic product hazards.

Constructing bulkheads, drops and feature ceilings including suspended framing, curved elements and lining at height.

Operating a bulldozer for stripping, pushing, stockpile and pad works in a mobile crushing and screening operation.

Installation of kitchen, bathroom and joinery cabinets - carcasses, benchtops, wall units and the appliance interface - so wall units cannot fall and benchtops are lifted mechanically.

Delivery and installation of manufactured cabinetry into a building - moving units through the building, levelling and fixing base and overhead units, scribing and final adjustment.

Installation of kitchen and bathroom cabinet carcasses and panels, including set-out, fixing wall and base units, benchtop handling and preparing openings for services.

Installing counters, cabinetry, shelving, wall panelling and display joinery into a tenancy, and fixing it back to the structure.

Installing cabinetry, benchtops and splashbacks on site - setting out, fixing carcasses, handling and fitting stone and laminate benchtops, and installing glass and tiled splashbacks.

Installation of cabinetry, stone and stainless benchtops and glass and stainless splashbacks, including carry-in, on-site trimming, fixing and jointing.

Hauling cable through ducts, conduits and pathways by winch or hand including drum handling, roller set-up and pit access.

Hauling and pulling of cables through conduits, ducts, trays and risers using hand and winch methods, including drum handling and work in pits and risers.

Hauling and pulling of cables through conduits, ducts, trays and risers using hand and winch methods, including drum handling and work in pits and risers.

Hauling and pulling of cables through conduits, ducts, trays and risers using hand and winch methods, including drum handling and work in pits and risers.

Installation of cable ladder, tray, duct and conduit systems on slabs, walls and suspended supports, including work at height, drilling fixings and cutting.

Installation of cable ladder, tray, duct and conduit systems on slabs, walls and suspended supports, including work at height, drilling fixings and cutting.

Installation of cable ladder, tray, duct and conduit systems on slabs, walls and suspended supports, including work at height, drilling fixings and cutting.

Installation of cable ladder, tray, duct and conduit systems on slabs, walls and suspended supports, including work at height, drilling fixings and cutting.

Assembling and installing cantilever, umbrella and pre-engineered shade structures, including counterweights, arms, mechanisms and fixed or in-ground bases.

Assembling the car sling and car, filling and hanging the counterweight, installing the machine and sheaves, reeving and terminating suspension and compensation ropes, and tensioning and balancing before the first run.

Installing and servicing LPG systems in caravans, motorhomes, boats and mobile food vans - cylinder lockers and ventilation, regulators, piping and hoses, appliances, testing to the caravan and boat standard and compliance.

All carpentry works - framing, trusses, lock-up, fix-out, cladding, decking, stairs, handrails and cabinetry, where task-specific SWMS are not required.

Overarching SWMS for all carpentry works - framing, trusses, lock-up & fix-out, cladding, decking, stairs, handrails & cabinetry - where a dedicated task SWMS is not in place.

Repairing and replacing sections of carpet and resilient flooring: patching, re-stretching, replacing damaged tiles and planks, re-seaming and re-fixing trims.

Carpet and upholstery cleaning by hot water extraction, encapsulation and spotting in commercial and residential settings.

Carpet and upholstery cleaning by hot water extraction, encapsulation and spotting in commercial and residential settings.

Installing broadloom carpet and carpet tiles: underlay, smooth edge and grippers, adhesive and tackifier, stretching, seaming, trimming, stairs and stair nosings.

Supply and installation of broadloom and tile carpet, including substrate preparation, adhesives, stretching and trimming.

Installing carpet, vinyl and resilient floor coverings: taking up the old floor, preparing the subfloor, laying, seaming, welding, trimming and repair.

Casting precast and tilt-up concrete panels on casting beds, including formwork and reinforcement, placing certified lifting inserts, finishing and edge preparation ready for lifting.

Response to sewage backflow, black water flooding or other grossly contaminated water - containment, extraction, decontamination and disposal where pathogen exposure is the primary hazard.

Preparing, priming, backing and applying construction sealants to expansion, control and perimeter joints on concrete, masonry, cladding and wet areas.

Caulking, grouting and patching of concrete joints, defects and penetrations, including surface preparation, chemical handling and finishing.

Caulking, grouting and patching of concrete joints, defects and penetrations, including surface preparation, chemical handling and finishing.

Installing, mounting and aiming CCTV cameras on external poles, eaves, walls and roof edges, and running Power-over-Ethernet (PoE) or mains cabling to each camera position.

CCTV inspection of drains and sewers using surface-deployed push and crawler cameras, including pit access, camera deployment, traffic control and reporting.

Installing ceiling tiles and panels into suspended grid including cutting tiles, working at the open grid and closing out ceiling voids.

Installing steel stud partitions, plasterboard linings, suspended ceilings, bulkheads and finishing across the full ceilings and partitions scope.

Installing, servicing and repairing centre pivots, lateral moves, travelling irrigators and hose reels on farms - towers and spans, drive units, overhead lines, tractors and PTO drives, water supply and remote work.

Continuous flight auger piling including drilling, concrete injection through the hollow stem, auger extraction, spoil management and cage installation into wet concrete.

Operation of a chain trencher (walk-behind or ride-on) to cut trenches for services and drainage, including set-up, trenching and shutdown.

Ground-based chainsaw operation - cross-cutting, limbing, pruning cuts and storm clean-up, including starting, fuelling and chain maintenance.

Storing, decanting, mixing, applying and disposing of gutter and roof cleaning chemicals, moss treatments, sealants and fuel - for the jobs that carry chemical products.

Diluting concentrate to working strength, decanting into trigger bottles and dosing equipment, and storing cleaning chemicals in commercial and office cleaning operations.

Applying herbicides and pesticides by backpack and hand sprayer for weed and pest control in garden beds, lawns, paths and fence lines.

Overarching SWMS for civil construction where a dedicated task SWMS is not in place - mobilisation, services, excavation, drainage, roadworks, concrete, plant, traffic, hazardous substances and demobilisation.

Installing external wall cladding - fibre cement, weatherboard, metal and composite panels.

Removal and installation of facade cladding panels at height using industrial rope access (dual independent ropes) or suspended powered scaffolds (swing stages).

Installation of external wall cladding - fibre cement, weatherboard, metal and composite panels - from scaffold, elevating work platform (EWP) or trestle platforms.

Removal and installation of facade cladding panels using industrial rope access methods on two independent ropes.

Removal and installation of facade cladding from suspended powered scaffolds (swing stages).

Overarching SWMS for all cleaning operations - commercial, construction cleans, public areas, amenities, pressure washing, window & solar cleaning and carpet cleaning - where a dedicated task SWMS is not in place.

Cleaning of public areas and park amenities - malls, foyers, transport hubs, streetscapes, park toilets, BBQs, shelters and furniture - during and outside operating hours.

Cleaning of public areas and park amenities - malls, foyers, transport hubs, streetscapes, park toilets, BBQs, shelters and furniture - during and outside operating hours.

Clearing blocked, bridged or stalled material from a mobile crusher - isolation and lock out, safe release of stored energy, remote and mechanical clearing, controlled restart.

Operation of the CNC router and nesting machine - loading and nesting sheets, program setup and proving, tool changes, vacuum hold-down and unloading machined parts.

Working on transcritical and subcritical carbon dioxide systems and industrial ammonia plant - very high pressures, dry ice and asphyxiation from CO2, toxic ammonia, plant rooms, detection, isolation and emergency response.

Removing coatings, paint, epoxy, adhesives, membranes and glue beds from concrete with diamond tooling, scrapers and coating removers before grinding - identification, dust and vapour control and waste.

Cold milling and profiling of existing pavement including profiler operation, loading millings to trucks via conveyor, pick changes and clean-up sweeping within a traffic closure.

Marking with cold-applied plastic and two-part resin systems - methyl methacrylate and epoxy - including catalyst handling, mixing, screed and spray application and cleanup.

Overarching SWMS for commercial and office cleaning operations - offices, common areas, washrooms, floors, kitchens and amenities cleaned as part of a general contract.

Installing and servicing commercial kitchen and industrial gas appliances - cooking lines, fryers, ovens, boilers and process burners - interlocks with exhaust hoods and gas detection, isolation, flues and commissioning.

Commercial and industrial refrigeration - cold room and freezer construction and repair, plant installation, pipework and testing, refrigerant handling, CO2, ammonia and flammable systems, call-outs and cold rooms.

Testing and energising battery, inverter and stand-alone systems - pre-energisation checks, insulation and polarity tests, first energisation in sequence, battery management verification, backup and export tests and records.

Commissioning and testing lifts and escalators - safety circuit and door tests, load and brake tests, overspeed governor, safety gear and buffer tests, hydraulic tests and the tests the standard requires before handover.

Installing and fitting out communications racks, servers, UPS and battery systems in comms rooms and live data centres.

Installing and fitting out communications racks and cabinets housing the security head-end - NVR, alarm and access-control controllers, network switches and UPS - in comms rooms and equipment cupboards.

Cutting chases in concrete and masonry for services using wall chasers, saws and breakers.

Hand sawing, flat sawing, wall and wire sawing, core drilling and chasing of concrete where a task-specific SWMS does not apply.

Selective concrete demolition (hydrodemolition) using ultra-high pressure water-jetting equipment.

Setting out and forming concrete edging, haunching and mowing strips, placing and finishing wet concrete, and setting precast kerb and edge units.

Excavation and pouring of footings and foundations, including service location, trench support, reinforcement, concrete placement and curing.

Excavating and pouring footings and foundations, including service location, trench support, reinforcement, concrete placement and curing.

Coarse grinding concrete floors with planetary and ride-on grinders to flatten, remove laitance and expose aggregate - dust extraction, wet grinding, tooling changes, edge grinding and slurry control.

Grinding, honing and polishing concrete floors - floor assessment, coating removal, coarse grinding and aggregate exposure, honing and densifying, polishing and burnishing, sealing, slurry and site power.

Grinding, honing and polishing of concrete floors with walk-behind and hand machines using dry and wet systems and slurry management, so silica dust is captured and electrical equipment is safe around water.

Grinding, honing and polishing concrete floors with walk-behind and hand machines using dry/wet systems and slurry management.

Grinding, honing and polishing concrete floors with walk-behind and hand machines, including dry-with-extraction and wet systems and slurry management.

Grinding, honing and polishing of concrete floors with walk-behind and hand machines, including dry extraction, wet systems and slurry management.

Construction of concrete kerb and channel by extrusion machine or hand forming, including set-out, concrete supply, finishing, joint sawing and curing.

Construction of concrete kerb & channel by extrusion machine or hand forming, including set-out, base preparation, concrete supply, finishing, joint sawing and curing.

Placing precast concrete panels, crib units, mass blocks and post-and-panel systems for retaining walls with cranes and excavators - lift planning, rigging, propping until backfilled, cutting and finishing.

Construction of concrete pavements, footpaths and vehicle crossovers - set-out and subgrade preparation, formwork, mesh and dowels, concrete placement, screeding and finishing, joint sawing, curing, and reinstatement around pit lids and service covers.

Installation of bored and driven concrete piles, including rig set-up, boring, reinforcement cages, concrete placement and spoil management.

Installation and removal of bored and driven concrete piles, including rig set-up, boring, reinforcement, concrete placement, and breaking out and extracting existing piles.

Placement, screeding, floating and finishing of concrete slabs and elements, including power trowelling and curing.

Placing concrete into pile bores by direct discharge, hopper and tremie methods including tremie pipe handling, pour monitoring and protection of the completed pile.

Construction of concrete (shotcrete/gunite sprayed) swimming pools including steel fixing, plumbing rough-in, shotcrete application, curing and stripping.

Truck-mounted boom pump and static line pump operations - set-up on outriggers, pipeline and hose work, placing, blockage clearing, cleaning out and the powerline, traffic and washout interfaces.

Placement of concrete by truck-mounted boom pump or static line pump, including set-up, priming, pumping, line moves and washout.

Placement of concrete by truck-mounted boom pump or static line pump, including set-up, priming, pumping, line moves and washout.

Pumping concrete to pile positions using boom and line pumps including pump set-up, line laying, pumping, blockage clearing and washout.

Sawing and core drilling concrete with demo saws, ring saws, road saws and core rigs, including service scanning and slab penetrations, so concealed services and PT strands are never cut and silica is suppressed.

Sawing and core drilling of concrete using demo saws, road saws, ring saws and core rigs, including service scanning, slab penetrations and wall openings.

Scanning concrete structures with GPR or cover meter to locate reinforcement, post-tension strands, conduits and services before cutting or coring.

Scanning concrete structures with GPR and cover meter to locate reinforcement, post-tension strands, conduits and services before any cutting or coring.

Construction of concrete slabs on ground, including preparation, membranes, reinforcement, pouring, finishing and curing.

Constructing concrete slabs on ground, including preparation, membranes, reinforcement, pouring, finishing, sawn joints and curing.

Construction of concrete slabs on ground for sheds and rural buildings, including base preparation, membranes, reinforcement, pouring, finishing and curing.

Breaking out drummy and spalled concrete, treating corroded reinforcement and reinstating concrete repairs to facade elements and balconies.

Underpinning existing footings by sequential excavation and concrete pours beneath structures.

Underpinning existing house footings by sequential hand or machine excavation of pin pits and concrete pours beneath the footing, to the engineer's design and sequence.

Construction of waffle pod raft slabs - pod and rib layout, reinforcement, plumbing penetrations and pour.

Collection, containment and disposal of concrete washout water and slurry from trucks, pumps and tools.

Collection, containment and disposal of concrete washout water and slurry from trucks, pumps and tools.

Formwork, reinforcement, placing, finishing, jointing and curing of concrete works (footings, slabs, paths, kerbs), including delivery by truck, pump or barrow.

Formwork, reinforcement, placing, finishing, jointing and curing of concrete for landscaping (footings, slabs, paths, kerbs), including delivery by truck, pump or barrow.

Hard landscaping concrete works including formwork, reinforcement, pour, finishing and curing for paths, slabs, mowing strips, footings and edges.

Concrete works for softfall edging, pads, mowing strips and footings including formwork, reinforcement, pour, finishing and curing.

High pressure washing of concrete slabs, industrial hardstand, loading docks and carparks, including oil and grease pre-treatment and cleaning around live vehicle movements.

All concreting works including services and excavation, steel fixing, formwork, placement by chute/pump/barrow, finishing, sawing/coring/grinding, precast and tilt-up, washout and demobilisation.

Stringing, sagging, tensioning and terminating overhead conductors and service cables - drum and reel set-up, running out under tension, pulling through rollers and across roads, sagging, clipping in and tie-off.

Sealing joints and penetrations inside pits, tanks, risers, shafts, ceiling voids, plant rooms and other enclosed or poorly ventilated spaces.

Confined space entry operations covering identification and classification, entry permits, isolation, atmospheric testing, ventilation, vertical access, standby and rescue.

Entry into and work within confined spaces (pits, tanks, chambers, pipes, vaults) covering identification, permits, isolation, atmosphere control, entry, the task, standby and rescue.

Standby (sentry) duties and rescue arrangements for confined space entries, covering communications, retrieval systems, written rescue planning and emergency response.

Entry into and work within confined spaces such as pits, tanks, chambers, pipes and vaults, including identification, permits, atmospheric control, entry, the task and rescue.

Construction works carried out during night hours, including site set-up, plant operation, traffic management and pack-down under artificial lighting.

Construction and traffic management works carried out during night hours under artificial lighting, including set-up, plant operation, manual control and pack-down where darkness, fatigue and impaired drivers raise the risk.

Setting out and transferring levels on an active construction site - working among operating plant, setting out on formwork and reinforcement, and transferring levels between floors and structures.

Cleaning of construction site amenities - toilets, lunchrooms, change rooms and site offices - on active construction sites.

Cleaning of construction site amenities - toilets, lunchrooms, change rooms and site offices - on active construction sites.

Installing consumer gas piping in copper, steel, polyethylene and multilayer systems - routes and sizing, supports and sleeves, penetrations and chasing, brazing, press, compression, threading and fusion joints, and protection.

Collecting, classifying, containing, storing, transporting and disposing of spent abrasive, blast dust, coating residue, filters, sheeting and empty containers.

Remediation of contaminated land - sampling and validation, exclusion zones and decontamination, excavation, stockpiling, classification and disposal, asbestos in soil, ground gas and groundwater.

Packing, cataloguing and transporting a household's or business's contents affected by water, fire or biohazard damage, and storing them securely pending restoration or disposal.

Installing and wiring irrigation controllers, solenoid valves, decoders, sensors and pump start relays - mains supply to the controller, extra-low-voltage field wiring, valve boxes and fault-finding.

Constructing cool rooms, freezers and cold stores from insulated panels - delivery and storage, standing and locking panels, ceiling panels, cutting, EPS and PIR fire control, doors and emergency hardware, electrical and plant.

Construction of cool and freezer rooms including insulated panel walls and ceilings, doors, refrigeration plant and electrical, including industrial ammonia systems.

Repair and maintenance of cool and freezer rooms including panels, doors, refrigeration and electrical systems, including industrial ammonia plant.

Repairing cool rooms and freezers in operating premises - panels, doors, seals, heaters and lighting, the internal emergency release and alarms, cold exposure, entrapment and the refrigeration and electrical systems.

Resin flooring in cool rooms, freezers, food and beverage plants, kitchens, hospitals and operating businesses - cold, wet floors, plant isolation, hygiene zones, out-of-hours work and vapour control.

Installation of cornice, ceiling roses and decorative plaster elements by cutting, adhesive fixing and finishing at ceiling height.

Epoxy crack injection and installation of structural strengthening systems to facade and structural elements under engineering direction.

Repairing cracks, spalls and joints before resin flooring - chasing and routing cracks, cleaning, epoxy injection and filling, polyurea joint sealing and cementitious or epoxy mortar patching.

Lifting retaining wall materials with a crane, a vehicle loading crane, an excavator or a skid steer - unloading deliveries, lifting blocks, panels, crib units, sleepers, posts and boulders, and landing them on the wall line.

All crane and lifting operations - mobile, tower, vehicle-loading and mini cranes, hoists, rigging, dogging and lift planning - covering the full lifting scope where a task-specific SWMS is not required.

Lifting and placing trees, rocks, precast and structural elements using mobile cranes and rated mobile plant, including lift planning, rigging, exclusion zones and load control.

Mobile crane operations covering siting, set-up, lift planning, lifting and demobilisation on commercial sites.

Mobile crane and telehandler operations for shed and rural building erection - siting, set-up, lift planning, lifting frame and roofing components, and demobilisation.

Crane truck deliveries and mechanical lifting of stone slabs and units using vacuum lifters, slab clamps, slings and vehicle loading cranes.

Delivering product off site with crane trucks and tippers - load restraint, delivery-point assessment, outrigger setup, craning, tipping, powerline clearances and public protection.

Positioning personnel in a crane-suspended workbox to reach work only where no safer means of access is reasonably practicable.

Determining the critical fall height each play or fitness item needs, setting and checking surfacing depth during the pour or lay, and impact attenuation testing before handover.

Managing crowds & pedestrian flow at events to prevent crush & surge, keep the public clear of works & maintain emergency egress.

Spreading, levelling and compacting crushed rock sub-base and basecourse using trucks, skid steers, graders, rollers and plate compactors to form a stable base for paving, asphalt or structures.

Spreading, trimming and compacting crushed rock sub-base and basecourse with trucks, skid steers, rollers and plate compactors to form the paving base.

Maintenance of mobile crushing and screening plant - liner, jaw plate and screen media changes, belt and guard repairs and hot work, under full lockout-tagout isolation.

Serving and loading retail and trade customers in the yard - customer vehicle movement, customers on foot, loading cars and trailers, conflict management and retail-area housekeeping.

All data & communications work including structured copper & fibre cabling, pit & pipe, cable hauling, comms room fit-out, trench, riser & confined-space tasks where a task-specific SWMS is not in place.

Installing and terminating structured data and communications cabling through ceilings, risers and pits including copper and fibre.

Installation, hauling and termination of data and communications cabling through ceilings, risers, pits and equipment rooms.

Installing and terminating structured data and communications cabling through ceilings, risers and pits including copper and fibre.

Installation of structured data, communications and optical fibre cabling in commercial and residential premises, including ceiling spaces, risers, communications rooms and external lead-ins.

Installation of structured data, communications and optical fibre cabling in commercial and residential premises, including ceiling spaces, risers, communications rooms and external lead-ins.

Construction of timber and composite decks - footings, posts, subframe bearers and joists, and decking boards, including raised and elevated decks.

Overarching SWMS for deck, pergola and outdoor structure construction - footings, subfloor framing, decking, pergola and verandah frames, roof sheeting and balustrades - where a dedicated task SWMS is not in place.

Application of sealers and decorative coatings to concrete surfaces, including solvent and water-based products by spray and roller.

Applying sealers, stains, guards and decorative coatings to ground and polished concrete by spray and roller - solvent and water-based products, ventilation, ignition control and cure.

Delivery, loading and unloading of event equipment from trucks and trailers using forklifts, tailgates and manual handling at venues and yards.

Receiving deliveries and loading or unloading vehicles using forklifts, tailgate loaders and manual handling.

Loading and unloading of trucks and vans at depots, stores, docks and construction sites - by hand, forklift and vehicle-mounted equipment.

All demolition works - soft strip, internal demolition, structural demolition, asbestos and services management, dust control, working at height and mechanical demolition where a task-specific SWMS is not in place.

Demolition of minor landscape structures and hard surfaces - paths, slabs, footings, masonry/retaining walls, timber structures, edging and site furniture - by hand tools, power tools and plant.

Structural demolition of residential buildings and elements using manual and mechanical methods.

Structural demolition of load-bearing elements and buildings using an engineered plan, sequenced top-down with mechanical plant and temporary support.

Operating large-format printers, laminators and cutting plotters in the sign shop - loading media rolls, ink handling and head cleaning, laminating with heated pressure rollers and cutting finished prints.

Support work delivered in participants' homes, supported accommodation and the community - personal care, transfers, domestic assistance, transport and social support.

Mobile crane lifting of steel members and materials including lift planning, crane set-up, dogging and rigging, lifting operations and demobilisation.

Mobile crane siting, set-up, dogging and lifting operations so the crane cannot overturn or contact powerlines and no person is ever struck by a load.

Household tasks in participants' homes - cleaning, dishes, rubbish, bed-making and tidying - using the household's own products and equipment.

Installing and connecting garage door openers and gate motors - mounting, plug-in or electrician connection, extra-low-voltage accessories, limits and force, manual release and the fixed-wiring interface.

Fitting and replacing locks, cylinders, deadbolts, closers, hinges, panic hardware and door furniture on timber, metal, glass and fire-rated doors - morticing, drilling, hanging and adjusting doors.

Closed-circuit television (CCTV) inspection, high-pressure water jetting and electric eel clearing of sewer and stormwater drains from surface access pits and inspection openings.

Clearing and maintenance of stormwater and sewer drains, pits, culverts and open channels, including high-pressure jetting, vacuum and grab removal, pit access and disinfection.

CCTV inspection, high-pressure water jetting, cured-in-place re-lining and disinfecting of drains and pipelines from surface access pits.

Installation of stormwater and subsoil drainage - trenching, laying pipe and aggregate, building pits and connecting to existing systems, including deep trenching and pit entry.

Installing stormwater and subsoil drainage for paving - trenching, laying pipe and aggregate, setting pits and grates and connecting to the existing system.

Sewer and stormwater drainage - excavation and laying, pits and connections, CCTV inspection, high-pressure jetting and eel clearing, cured-in-place relining, pipe bursting, confined pits and call-outs.

Installing the drainage behind the wall - agricultural pipe, drainage aggregate, geofabric and outlets - and placing and compacting backfill in lifts with skid steers, plate compactors and trench rollers without surcharge.

Rotary, impact and vibratory drilling and piling for foundations, anchors and investigation, including rig set-up, pile handling, driving, in-hole tooling and grouting.

Drilling and fixing into brick, block, concrete, render and cladding to install brackets, tracks and frames for blinds, awnings and window furnishings.

Installing precast, steel and timber piles with impact hammers and vibratory drivers including pile pitching, alignment, driving and cut-off.

High pressure and surface-cleaner washing of concrete, paved and exposed-aggregate driveways, paths and courtyards, including stain pre-treatment and edge/garden protection.

Commercial remotely piloted aircraft operations including site survey, inspection and aerial imagery over construction and public areas.

Commercial remotely piloted aircraft operations including site survey, inspection and aerial imagery over construction and public areas.

Installation of HVAC ductwork including suspended runs, risers, plant connections, insulation and the use of duct lifters.

Applying acoustic lagging - mineral wool, foam and mass-loaded vinyl - to ductwork and pipes, fitting resilient pipe hangers and isolators, and lining duct plenums in ceiling spaces, risers and plant rooms.

Obtaining and working under electrical access authorities and the network's permit system - isolation points, proving de-energised, applying and removing working earths, control of the work group and surrender.

Operation of excavators in earthmoving and civil works - pre-start, plant and people separation, digging near services and edges, lifting, attachment changes and shutdown.

All earthmoving and mobile plant operations - mobilisation and floating, service location, bulk and detailed earthworks, multiple machine types, refuelling and field maintenance, tyre and vehicle work, and demobilisation - where a dedicated task SWMS is not in place.

Operation of skid steer and posi-track (compact track) loaders - pre-start, loading and site travel, attachment changes, and work by people around the operating machine.

Operation of earthmoving equipment (excavators, loaders, dozers, backhoes, skid steers) for cut, fill, loading and levelling, including pre-start, operation among workers, attachments, refuelling and shutdown.

Operation of the edgebander - applying and trimming edge tape to panels, including hot melt glue pot operation, trimming stations and machine cleaning.

Installation and maintenance of rural fencing - post driving, wire straining and electric fence energisers - on farms and acreage.

Installing card, fob and personal identification number (PIN) readers, electric strikes, magnetic locks and door controllers on internal and external doors, including fire and emergency egress doors.

Operation and routine use of electric vehicle charging equipment for fleet and plant, covering depot AC/DC chargers and temporary site charging.

Disconnection, make-safe and removal of electrical installations during demolition and strip-out works.

Disconnection, make-safe and removal of electrical installations during demolition and strip-out works.

Disconnection, make-safe and removal of electrical installations during demolition and strip-out works.

Overarching SWMS for EV charging station installation where a dedicated task SWMS is not in place - mobilisation, isolation, cabling, switchboards, charger installation, commissioning and demobilisation.

Electrical work in existing and occupied buildings under renovation including alterations, rewiring and switchboard upgrades.

Electrical work in existing and occupied buildings under renovation including alterations, rewiring and switchboard upgrades.

Electrical work in existing and occupied buildings under renovation, including alterations, rewiring and switchboard upgrades around legacy and DIY wiring.

Electrical work in existing and occupied buildings under renovation including alterations, rewiring and board upgrades around legacy live wiring.

Supplying and using power for grinding and polishing - three-phase supply and distribution boards, generators, leads across wet floors, residual current devices, machine inspection and isolation for tooling changes.

Overarching SWMS for solar PV work where a dedicated task SWMS is not in place - mobilisation, roof and ground-mount installation, DC and AC cabling, isolation, height and roof work, and demobilisation.

Connection, testing and removal of temporary electrical supply for events including connection at the point of supply, distribution boards, RCD-protected subcircuits, three-phase and festoon lighting.

Overarching SWMS for general electrical work where a dedicated task SWMS is not in place - mobilisation, isolation, cabling, switchboards, installation and repairs, height and roof work, and demobilisation.

Overarching SWMS for the full electrical, HVAC and solar scope where a dedicated task SWMS is not in place - mobilisation, isolation, cabling, switchboards, installation and renovation, HVAC and refrigerant, solar PV, height and roof work, overhead lines, hazardous substances and demobilisation.

Fall protection for elevated deck construction - unprotected edges during the build, temporary edge protection, fall-restraint and fall-arrest systems, and the sequence through to the permanent balustrade.

Fire and emergency response in homes and supported accommodation where the participant cannot evacuate unaided - planning, assisted escape, refuge and communication with emergency services.

Emergency make-safe and replacement of broken glass in shopfronts, doors and windows, often after hours, after break-ins or storms.

Attending lockouts of homes, businesses, vehicles and rooms - verifying authority, non-destructive entry by picking, bypass and decoding, destructive entry by drilling and cutting, and securing afterwards.

First-response make safe of a fire, storm or impact-damaged building - structural assessment before entry, temporary roofing, and boarding up windows and doors, often as an out-of-hours callout.

Removing, repairing and refitting engines, gearboxes, clutches, tailshafts and differentials, including work on hot, pressurised and spring-loaded components.

Releasing passengers trapped in a stalled lift car - contact and reassurance, securing the lift, moving the car to a landing by hand-winding, brake release, manual lowering or rescue drive, opening the doors and escorting out.

Applying epoxy and polyurethane primers, build coats and topcoats by roller and squeegee - surface acceptance, priming, coating within the recoat window, broadcast finishes, curing and reoccupation.

Preparation and application of epoxy, polyurethane and resin floor coatings and toppings, including grinding preparation and multi-coat application.

Epoxy, polyurethane, polyurea and methyl methacrylate flooring - floor assessment, covering removal, grinding and blasting, crack repair, resin mixing, coating and topping application, spray systems and cure.

Erection, alteration and dismantling of fixed modular or tube-and-coupler scaffold, including base preparation, progressive erection, tying and handover.

Erection, alteration and dismantling of fixed (modular or tube-and-coupler) scaffold including base preparation, progressive erection, tying and handover.

Erection, alteration & dismantling of fixed (modular / tube-and-coupler) scaffold including base preparation, progressive erection, tying & handover.

Erection, alteration and dismantling of fixed (modular & tube-and-coupler) scaffold including base preparation, progressive erection, tying and handover.

Servicing, repairing and modernising escalators and travelators - isolation, landing barriers, removing comb plates, steps and skirt panels, truss and pit work, step band and chain work on inspection drive and return to service.

Installation of AC electric vehicle (EV) chargers and DC fast chargers in residential, commercial and car park settings, including dedicated circuits, mounting and commissioning.

Installation of AC electric vehicle (EV) chargers and DC fast chargers in residential, commercial and car park settings, including dedicated circuits, mounting and commissioning.

All events works including venue inspection, indoor and outdoor bump-in and bump-out, staging, rigging, lighting and AV, marquees, temporary power, catering and crowds where task-specific SWMS are not required.

Set-up, elevated work and stowing of boom lifts, cherrypickers and scissor lifts for data & communications work at height.

Operating boom lifts, cherry pickers & scissor lifts at events to access height for rigging, lighting & structure work without falls, ejection, tip-over or contact with services.

Set-up and operation of boom-type and scissor elevating work platforms (cherry pickers, knuckle booms and scissor lifts) for access and work at height.

Operating elevated work platforms (boom and scissor lifts) for construction tasks at height, including set-up, working from the basket and emergency lowering.

Bulk and detail excavation, spoil loading and disposal including work near existing underground assets.

Shallow excavation for subbases and footings and the loading, cartage and lawful disposal of spoil, with deeper excavation managed only where required.

Shallow excavation for subbases and footings and the loading, cartage and lawful disposal of spoil, with deeper excavation managed only where required.

Shallow excavation for subbases and footings and the loading, cartage and lawful disposal of spoil, with deeper excavation managed only where required.

Excavating footing holes, pin pits and trenches beside and beneath an existing house, including location of the house's own services, ground support, entry and reinstatement.

Mechanical and hand excavation, trenching and spoil handling for landscaping works, including support, exclusion zones, safe entry/exit and reinstatement.

Mechanical and hand excavation for paving boxes, edge footings, drainage and service trenches, including spoil handling, support, safe access and reinstatement.

Excavating cable trenches, pits and pole and stay holes on the road reserve and easements near existing assets - service location, ground support, entry, service strike response and reinstatement.

Excavation in proximity to underground and overhead assets (power, gas, water, sewer, fuel, comms) - locating, potholing, exposing, supporting and reinstating services around concreting works.

Excavating the cut for a retaining wall and its footing - the temporary batter or shoring, face inspection, groundwater, plant at the crest, spoil, adjacent structures and boundaries, and protecting the cut until built.

Mechanical and hand excavation and trenching for irrigation mains, laterals, valve boxes, pump pads and tanks, including chain trencher and vibratory plough operation - service location, ground support, exclusion zones, safe entry and exit and reinstatement.

Operation of earthmoving equipment (excavators, loaders, dozers) for cut, fill, loading and levelling - pre-start, operation among workers, attachments, refuelling and shutdown.

Operation of excavators in earthmoving operations - pre-start, plant and people separation, digging near services and edges, lifting, attachment changes and shutdown.

Operating an excavator to feed the mobile crusher, sort and rehandle material, and support crushing and screening operations.

Establishing and running the exclusion, contamination reduction and clean support zones on a remediation site - fencing and signage, controlled entry, personnel and plant decontamination and hygiene.

Lifting an existing floor covering and its adhesive bed: carpet, vinyl, tile, cork, timber overlay, tack strip and residual adhesive.

Lifting an existing floor covering and its adhesive bed: carpet, vinyl, tile, cork, timber overlay, tack strip and residual adhesive.

Sealing expansion, control and construction joints in concrete slabs, pavements, carparks, walls and precast panel work with the specified sealant system.

Installation of external folding-arm and fixed-frame awnings, including access at height, lifting the assembly, fixing to the structure and releasing spring-loaded arm tension.

Installing an external insulation and render system: substrate check, adhesive, insulation board, fixings, reinforcing mesh and base coat, beads and the finish coat.

Extra-low-voltage (ELV) and Power over Ethernet (PoE) installations for security and access-control equipment; mains electrical work is carried out by a licensed electrician.

Fitting wire rope, turnbuckles, shackles and pulleys, attaching sail corners and tensioning the fabric with hoists and turnbuckles, and checking the finished rig.

Facade and remedial building works on occupied buildings including suspended access, rope access, concrete spalling repair, cladding replacement, render and sealant works.

Removal of existing facade cladding including aluminium composite panels (ACP) with combustible cores, and lowering, segregation and disposal in accordance with the cladding remediation plan.

Cutting out failed facade joint sealants and mastics, preparing joints and installing new backing rod and sealant systems.

Cutting out failed facade joint sealants and mastics, preparing joints and installing new backing rod and sealant systems.

Assembly of modular building units on the factory floor - jig-based framing, panel fabrication and fit-out, using overhead gantry cranes and fixed production plant.

Installation, loading and removal of falsework and back-propping systems supporting formwork and freshly cast structures, including multi-level back-propping.

Installation, loading and removal of falsework and back-propping systems supporting formwork and freshly cast structures, including multi-level back-propping.

Installation of fascia, shopfront, wall and building signs - fixing at height from an elevating work platform (EWP) or scaffold, handling large panels, engineered fixings and the public below.

Installation of timber, steel (Colorbond), chain wire and security fencing including set-out, post holes, concrete footings, panel and rail fixing, and gates.

All commercial fencing works including boundary, security, temporary, rural and electric fencing, gates and sediment fence interfaces where task-specific SWMS are not required.

Installing child-safe playground fencing, self-closing gates and timber or steel edging - set-out, post holes, footings, panel and rail fixing, and gate hardware.

Spreading fertilisers, lime and top dressing by hand, push spreader and small machine across lawns and garden beds.

Fusion splicing and termination of optical fibre cables in pits, chambers, comms rooms and cabinets - preparation, splicing, jointing, termination and optical testing.

Installation of fibreglass swimming pool shells including excavation interface, crane lift and placement, backfilling, plumbing and finishing.

Builders & final clean of completed buildings, removing construction dust and residues from surfaces, glass, fixtures and floors before handover.

Builders & final clean of completed buildings, removing construction dust and residues from surfaces, glass, fixtures and floors before handover.

Restoration of a fire and smoke-damaged building - soot and residue cleaning, odour treatment and structural checks, including the risk of asbestos disturbed by fire and a compromised structure.

Installation of fire detection and alarm systems including FIP panels, detectors, cabling and interfaces with building services in new and occupied buildings.

Installing fire collars, cast-in collars and intumescent wraps and pillows on plastic and insulated pipes, cable bundles and ducts through fire-rated walls and floors - selection to the tested system, fixing and finishing.

Installing fire and fire-smoke dampers in ducts through fire-rated walls and floors - selection and orientation, framing and fixing to the tested detail, sealing the penetration, access panels and release tests.

Installation, flow and pressure testing and commissioning of fire hydrants, boosters and fire pumps, including diesel and electric pump sets in pump rooms.

All fire protection works including detection, alarms, sprinklers, hydrants, pumps, extinguishers, passive fire and testing where a task-specific SWMS is not required.

Installation and modification of fire sprinkler systems including pipework, heads, valves and connections in new and occupied buildings.

Applying tested fire-rated and acoustic sealant systems to construction joints, slab edges, riser walls and service penetrations, and recording the installation.

Installing fire-rated board systems - shaft walls and liners, duct and tray enclosures, steel encasement and riser walls - framing, cutting and fixing to the tested system and sealing joints and penetrations.

Building and penetrating fire-rated walls, ceilings and shaft linings in a tenancy, and reinstating the fire rating around every service that passes through them.

Passive fire protection - surveying and registering penetrations, sealing them with tested mortar, batt, sealant, collar and wrap systems, fire dampers, linear joints, fire-rated board and shaft walls, tagging and certifying.

Drilling and coring slabs, walls and ceilings and setting anchors to hang partitions, ceilings, bulkheads, signage, shelving and services in a fitout.

Working on systems charged with mildly flammable (A2L) and hydrocarbon (A3) refrigerants - identification, ignition source control, flammable-rated recovery and detection, brazing, charging, leak repair and storage.

Fabricating and fitting flashings, cappings, barges, valleys and trims - guillotine and folder work, cutting sheet on the roof with shears, nibblers and discs, riveting and sealing, and swarf control.

Installing floating floors and resilient layers - mats, pads and jack-up isolators, perimeter isolation, formwork and reinforcement, concrete or screed topping, jacking and levelling, and timber floating floors.

Installation of floating floors - laminate, engineered timber and hybrid planks - over underlay, including trimming and finishing.

Laying a floating floor over underlay: laminate, engineered and hybrid planks, expansion gaps, trims and thresholds, and the install clean-up.

Clean-up of flood & storm affected buildings including water extraction, contaminated material removal, drying & sanitisation in damaged premises.

Clean-up of flood and storm affected buildings including water extraction, contaminated material removal, drying and sanitisation in damaged premises.

Assessing the slab before grinding - existing coatings, adhesives and coverings, lead and asbestos screening, moisture, cracks, joints, floor outlets and services, hardness and the finish the client expects.

Assessing the slab before resin flooring - moisture and relative humidity testing, existing coating and adhesive identification, lead and asbestos screening, contamination, cracks and the preparation method.

Removal of carpet, vinyl, tiles and adhesive beds from floors, including ACM vinyl identification, mechanical scraping, adhesive-bed grinding and surface preparation.

Removing existing floor coverings and adhesive residue and laying the new covering, in a tenancy that may predate 1990.

Operating floor scrubbers, burnishers, buffers and polishers to clean, strip, seal and polish hard floor surfaces in commercial and office premises.

Mixing, placing and finishing sand-cement screeds, bedding and self-levelling compounds to floors.

Application of sand-cement screeds and bedding and self-levelling compounds to floors, including mixing, placing and finishing.

All flooring works including covering removal, substrate preparation, grinding and polishing, screeding, carpet, vinyl, resilient and timber laying, coatings and demobilisation.

Setup and operation of food stalls and catering at events using LPG cooking equipment, electrical appliances and hot cooking surfaces, indoors or outdoors.

Excavating and pouring retaining wall footings and post footings - trench footings, piers and post holes, reinforcement cages and starter bars, concrete delivery in a backyard, placement, finishing and curing.

Vegetation clearing with forestry mulcher attachments on excavators or skid steers, controlling ejected debris, fire risk & rollover.

Operating forklifts and telehandlers in the supplies yard - pallet and pack movement, racking work, truck loading and unloading, attachments, refuelling and battery charging.

Operation of counterbalance forklifts and order-pickers for loading, unloading, stacking and moving materials in yards, docks and warehouses.

All formwork operations - decks, walls, columns, stairs and falsework, including erection, pour support, stripping and back-propping.

Erection, use and stripping of formwork and falsework for suspended decks, columns and stairs.

Erection, use and stripping of formwork & falsework for suspended decks, columns and stairs.

All formwork operations including erection, pour support, stripping, propping, falsework and post-tensioning, slip and jump form interfaces, where a task-specific SWMS is not required.

Stripping of formwork from decks, walls, columns and stairs including approval to strip, sequence, materials handling and de-nailing.

Erection of timber and steel wall frames and roof trusses - delivery and stacking, standing and bracing frames, craned truss installation, tie-down and steel-framing fix.

Erecting timber and steel wall frames and roof trusses - standing frames, temporary bracing, truss installation and tie-down.

Erection of timber and steel wall frames and roof trusses - standing frames, temporary bracing, truss installation and tie-down.

Operating a front end loader in the supplies yard - loading customer vehicles and trucks, working bins and stockpiles, rehandle and housekeeping in areas shared with staff and customers.

Operating a front end loader for feeding hoppers, stockpiling, rehandle and truck load-out in a mobile crushing and screening operation.

Installation and removal of underground and above-ground fuel storage tanks including product removal, excavation, cranage and tank cutting.

Draining, storing, transferring and disposing of fuel, engine and gearbox oil, coolant, brake fluid and waste fluids in the workshop and the service vehicle.

Installation of site furniture - seats, tables, bins, bollards and shelters - including footing excavation, concreting, coring and anchoring to existing slabs, and positioning of heavy units.

Building gabion basket walls, dry-stacked rock walls and boulder walls - basket assembly and lacing, rock placement by excavator, hand-packing faces, boulder placement with rock grabs, slopes and watercourses.

Installing, servicing and repairing sectional, panel lift, tilt and roller garage doors, sliding and swing gates and their motors - springs, tracks, posts and footings, safety devices and force testing.

Garden and building supplies yard operations - customer service, loaders, forklifts and trucks, bulk stockpiles, racking and packaged product, cutting services and deliveries.

Weeding, cultivating, mulching, planting and general garden bed care by hand and with small tools.

Grounds and garden maintenance including mowing, brushcutting and whipper-snipping, hedge trimming, pruning, blowing, and herbicide application on commercial and public grounds.

Responding to reported gas smells, leaks and appliance faults - approach and assessment, network emergencies, tracing leaks with the detector, isolating at the meter or cylinder, ventilating, repairing and returning to service.

Installation, servicing and commissioning of gas appliances, meters and consumer piping by a licensed gasfitter.

Gasfitting and LPG installation - consumer piping, meters and service connections, purging and testing, appliance commissioning and carbon monoxide testing, cylinders and bulk tanks, commercial kitchens and fault finding.

Connecting consumer piping to the gas meter, regulator and service - meter position and ventilation, isolation, cutting in, purging, leak and pressure testing, commissioning the meter and the interface with the network's service.

Atmospheric testing and continuous gas monitoring for confined spaces and other hazardous atmospheres - instrument preparation, pre-entry testing, in-work monitoring and alarm response.

General commercial and site cleaning - surfaces, floors, amenities and waste - using cleaning chemicals and powered equipment.

General commercial and site cleaning - surfaces, floors, amenities and waste - using cleaning chemicals and powered equipment.

General cleaning of event sites, venues & amenities, including wet cleaning, chemical use, waste & sharps handling & manual tasks.

General and commercial cleaning including mopping, vacuuming, high dusting, chemical use, waste and sharps handling, and biohazard spill response in occupied premises.

General and specialist construction works - site set-up, public protection and minor structural and services works where a task-specific SWMS is not required.

General pest treatments in residential and commercial premises including spraying, dusting, gelling and baiting for cockroaches, ants, spiders and general pests.

Installation of geotextiles, geogrids, erosion matting and sediment fences in civil works, including handling rolls, placement on batters and in excavations, and driving pickets.

Installing toughened and frameless glass balustrades to balconies, stairs, pools and edges in commercial and residential settings.

Handling glass panels with powered and manual vacuum lifters - mobile glazing robots, crane-suspended frames and hand cups.

Broad master SWMS covering all commercial glazing where a task-specific SWMS is not required, so glass never breaks onto a person.

Cutting, handling and installing glass into frames and openings in commercial and residential settings.

Handling, processing and installation of glass including splashbacks, panels and frameless glazing, with transport, racking, cutting and breakage response.

Setting up and verifying global positioning system (GPS) bases, rovers and machine control - siting the base, checking the data, and working around machines that are driven by that data.

Removing graffiti from surfaces using chemical strippers, high pressure water and abrasive methods at ground level and at height in public areas.

Removing graffiti from surfaces using chemical strippers, high pressure water and abrasive methods at ground level and at height in public areas.

Entry into grain silos, bins and hoppers for inspection, cleaning and maintenance - isolation of filling and discharge equipment, atmosphere testing and engulfment controls.

Grassing works - subgrade preparation and topsoil placement, fertiliser and soil ameliorant application, instant turf delivery, handling and laying, hydroseed and hydromulch application, and establishment watering.

Collecting, loading and disposing of green waste, and chipping small prunings with a towable domestic-scale chipper.

Pruning shrubs and small trees from the ground with secateurs, loppers, pole saws and ground-based chainsaw work on small limbs - excludes climbing and aerial work.

Installation of ground-mounted solar farms including pile driving, racking assembly, module installation, DC stringing, inverters and HV interface across large remote sites.

Installation of ground-mounted solar farms including pile driving, racking assembly, module installation, DC stringing, inverters and HV interface across large remote sites.

Master SWMS for grounds and garden maintenance - mowing, brushcutting, hedge trimming, pruning, blowing, spraying, garden bed care and green waste handling across residential, commercial and public grounds.

Dewatering excavations and pits on a contaminated site and treating the water before discharge - pump set-up, contaminated water handling, on-site treatment, sampling and discharge under approval.

Operation of grout mixing and pumping plant for injection, ducts, bases and voids, including line management and washout.

Installing car and counterweight guide rails and brackets - plumbing the shaft, drilling and fixing brackets, hoisting rails up the shaft, aligning and joining rails, from the shaft scaffold, false car or car top.

Trenchless pipe installation by guided boring and pipe jacking between shafts, including shaft work, jacking operations, lubrication and breakthrough.

Clearing leaf litter, sludge, nesting material and debris from gutters, valleys and box gutters by hand and scoop, and lowering and disposing of it.

Cleaning gutters, valleys and downpipes and installing gutter guard, leaf guard and ember guard on houses and commercial buildings, from ladders, roofs, platforms and the ground.

Cleaning gutters and downpipes and carrying out minor roof maintenance from ladders, roofs and EWPs including gutter guard and minor repairs on single and two-storey buildings.

Flushing gutters and valleys, clearing blocked downpipes and underground outlets, and pressure washing gutter, fascia and eave lines.

Measuring, cutting and fixing mesh, panel and clip-in gutter guard, valley guard and ember guard to gutters, valleys, fascia and roof edges.

Clearing gutters from ground level with a vacuum unit, carbon fibre or alloy poles and a pole camera, and emptying and maintaining the unit.

Working with ladders, poles, lances and metal gutter lengths near overhead electric lines and the service line that lands at the fascia of the building.

Installing and replacing eaves gutters, fascia, downpipes, box gutters, sumps, rainheads and overflows - work at the gutter line from the EWP, scaffold or edge protection, box gutters on the roof and stormwater connections.

Handling ladders, gutter vacuum units, telescopic poles, hoses, guard bundles and debris bags by hand, on the ground and at height.

Installation of handrails and balustrades to stairs, landings, ramps and decks - timber, steel and glass infill systems - where the installer works at the very edge being protected.

Installation of handrails and balustrades to stairs, landings, ramps and decks in timber, steel and glass infill systems at exposed edges.

Installation of handrails, balustrades and edge barriers to stairs, landings, mezzanines and exposed edges, including measuring, drilling, fixing and finishing.

General handyman and property maintenance work including minor carpentry, patching, painting, fixture and fitting repairs, ladder and roof access, power-tool use and grounds work on occupied and commercial premises.

Sampling, classifying, segregating, tracking and disposing of excavated contaminated soil and fill - stockpile management, waste classification, licensed transport and disposal records.

Storing, decanting, mixing, applying, transporting and disposing of hazardous chemicals, fuels, herbicides and pesticides used on site, and responding to spills and exposure.

Operation of heavy vehicles - semi-trailers and low loaders - including plant loading, transport, fatigue management and site deliveries.

Servicing and maintenance of heavy vehicles and mobile plant, including isolation, raised components, stored energy, hot fluids and tyre work.

Servicing and maintenance of heavy vehicles and mobile plant, including isolation, raised components, stored energy and hot fluids.

Service, inspection and maintenance of waste collection and skip vehicles and their bodies - isolation and lock-out, work under raised bodies, stored energy, hot work and waste fluids.

Trimming hedges and shrubs with hedge trimmers, including long-reach machines and work from step platforms - blade contact, work at height and debris.

Selection and use of ladders, platform ladders, podium steps and mobile access towers for short-duration work at height, chosen to the hierarchy of control.

Restoring heritage stonework including raking out and repointing joints, indent repairs, stone replacement and cleaning from scaffold access.

High pressure water cleaning of hard surfaces, structures and facades using powered washers, lances and extension equipment.

Recognising, preventing and responding to high pressure water injection injury - an under-recognised, innocuous-looking wound capable of severe, rapidly-spreading subcutaneous damage.

Cleaning out joints, removing failed coatings and preparing concrete and masonry substrates with high pressure and ultra high pressure water before sealant is applied.

Preparing surfaces with high-pressure and ultra-high-pressure water: setting up the pump, hoses and lance, jetting the surface, controlling run-off and shutting down.

Design, erection, maintenance and removal of construction hoardings including overhead decks, lighting and public protection.

Design, erection, maintenance and removal of construction hoardings including overhead decks, lighting and public protection.

Removal of hoarding, temporary fencing and gantry structures in reverse sequence, and reinstatement of the footpath or road.

Selection, construction and maintenance of hoarding to the class and standard the council or road authority requires for the site.

Installation and ongoing management of engineer-specified bracing and ballast for temporary fencing, hoarding and gantry structures.

Overarching SWMS for hoarding, temporary site fencing, gantries and temporary propping works where no task SWMS is in place.

Transfers using mobile floor hoists and ceiling hoists with slings - bed, chair, shower and floor recovery transfers in homes and supported accommodation.

Honing and polishing ground concrete through the resin-bond grit sequence, applying densifier and grout, burnishing and finishing to the specified gloss - dust and slurry control, chemicals, the burnisher and inspection.

Horizontal directional drilling (HDD) for trenchless conduit and pipe installation, including pilot bore, reaming, pullback and drilling fluid management.

Delivery of hot asphalt by truck to paving operations, including loading at the plant, transport, reversing and docking with the paver, and tipping.

Set-up, operation, transport and maintenance of diesel or kerosene-fired hot water pressure washer units - the burner, fuel system, water coil and trailer-mounted plant.

Cutting, grinding, welding and soldering inside an occupied tenancy or centre under the building's hot work permit, and reinstating detection afterwards.

Raising, levelling and restumping of houses including engineered jacking, temporary support, stump replacement and lowering.

Raising, re-levelling, restumping and underpinning existing houses - assessment, services disconnection, subfloor work, jacking and cribbing, stump and pier replacement and underpinning.

Non-destructive digging, potholing and service location using trailer or truck-mounted hydro excavation units, including set-up, water lancing, vacuum recovery and tank discharge.

Hydro excavation and vacuum truck services - service location, potholing and slot trenching, truck and boom operation, liquid waste pump-out, dry vacuum loading, spoil discharge and disposal, traffic and call-outs.

Mixing and application of hydro-mulch and seed slurry for erosion control and revegetation, including tanker operation, batters and roadside work.

Hydro excavating slot trenches for services, deep potholes and pits around existing assets - lance and vacuum control at depth, exposed services, hole stability and support, spoil, and protecting the hole after work.

Assembling and installing illuminated signs and light boxes - extra-low-voltage LED modules and drivers, the licensed electrician interface for supply connection, existing sign circuits and legacy neon.

Vacuum loading dry and semi-dry materials - silos, hoppers, pits, plant floors, drill cuttings, sand, fly ash and spilled product - with the industrial vacuum loader: dust, silica, static, suction and the material.

Standard and transmission-based precautions during supports - hand hygiene, PPE, respiratory illness, gastro outbreaks and working across multiple homes in a day.

Deep cleaning and disinfection of premises affected by infectious-disease outbreaks and terminal cleaning of healthcare rooms following discharge, transfer or infectious cases.

Deep cleaning and disinfection of premises affected by infectious-disease outbreaks and terminal cleaning of healthcare rooms following discharge, transfer or infectious cases.

Spreading sand, crumb-rubber or organic infill by drop spreader and hand, and power brooming to stand the pile and work infill in.

Setting up, levelling and packing down total stations, theodolites and levels on tripods, including set-up position, raising poles and staffs, and protecting the setup from plant and traffic.

All insulation works including bulk batts and rolls, reflective foil, rigid panels, acoustic insulation, blow-in and spray foam across ceilings, walls, roof voids and underfloors.

Installation of bulk insulation, acoustic panels and ceiling panels in walls, ceilings and roof spaces.

Installation of bulk insulation and ceiling or acoustic panels, including work in roof spaces and from platforms below ceilings.

Installation of bulk insulation, acoustic panels and ceiling panels in walls, ceilings and roof spaces.

Installing bulk insulation batts and rolls to ceilings, roof voids, walls and underfloors, including fibre exposure, fall-through, hot and confined voids, downlight clearances and manual handling.

Installing audio and video intercoms, gate and boom-gate motors, and associated safety edges, photo-beams and loop detectors at vehicle and pedestrian entry points.

Installation of internal blinds, curtain track and rail, including bracket fixing, corded and motorised mechanisms, and child-safety compliance for corded products.

Installing hybrid and battery inverters, backup and changeover switching, and connecting to the switchboard and the grid - isolation of every source, dead-board working, arc flash controls, testing and network approval.

Installing irrigation systems - locating services, trenching for mains and laterals or routing pipe and conduit through buildings, slabs and rooftops; laying and jointing pipe, mains/backflow and controller/electrical connection, pressure testing and reinstatement.

Irrigation and water systems - service location, trenching and ploughing, pipe laying and jointing, mains and backflow, pumps, tanks and bores, controllers and wiring, sprinklers and drip, pivots and rural work.

Inspecting, adjusting and repairing garden irrigation - heads, valves, controllers and minor pipe repairs; excludes mains plumbing and electrical work.

Lifting a house on hydraulic jacks and needle beams in unified increments, cribbing as the lift proceeds, and holding it on cribs, props and beams until the new stumps or piers carry the load.

Master SWMS for joinery and cabinet making - workshop machining of timber and sheet goods, finishing, assembly, and delivery and installation of cabinetry on site.

Cutting out failed sealant, raking and cleaning joint faces, priming the substrate and installing backing rod and bond breaker tape ahead of resealing.

Erection, climbing and stripping of jump form and climbing formwork systems for cores and shear walls, including cast-in anchors, crane or hydraulic climbs and work from form platforms.

Construction and repair of kerb and channel including removal of existing kerb, subgrade preparation, slipform kerb machine operation, concrete delivery, hand finishing and joint cutting.