SWMS AUS

Fire Damper Installation & Access

Installing fire and fire-smoke dampers in ducts through fire-rated walls and floors - selection and orientation, framing and fixing to the tested detail, sealing the penetration, access panels and release tests.

SWMS template. Editable Word document, written for your state, ready to adapt to the job.

Objective

Prevent a damper that cannot close in a fire, a breached penetration around it, drilling into services and falls installing overhead through the tested detail, verified fixings, scanning and platform access.

Your state's laws, in the document

Each state version references the Act, regulator, and requirements for the state you select. Victoria gets the OHS Act and WorkSafe Victoria, NSW gets the WHS Act and SafeWork NSW.

NSW WHS Act 2011 VIC OHS Act 2004 QLD WHS Act 2011 SA WHS Act 2012 WA WHS Act 2020 TAS WHS Act 2012 NT WHS (National Uniform Legislation) Act 2011 ACT WHS Act 2011 National Model WHS Act (national)

When you'd use this SWMS

If fire damper installation & access is part of your job, the builder or head contractor will usually want a SWMS for it before you start on site. This one's editable in Word. Add your company and site details, check the hazards and controls against the actual job, and get your crew to sign on before work starts.

Not sure whether you need one? When a SWMS is required covers it, and the 18 high risk construction work categories are the list a principal contractor works from.

Doing the whole trade? The Firestop and Penetration Sealing pack bundles this with the rest and works out cheaper. New to it? Here's what goes in a SWMS.

Related SWMS

Firestop & Penetration Sealing - Master SWMS

Master

Passive fire protection - surveying and registering penetrations, sealing them with tested mortar, batt, sealant, collar and wrap systems, fire dampers, linear joints, fire-rated board and shaft walls, tagging and certifying.

$49.99

Site Establishment & Setout (Firestop and Penetration Sealing)

Setting up on a site or in an occupied building for firestop works - access to risers, ceilings and soffits, material storage, mixing stations, exclusion zones and marking the penetrations to be sealed.

$49.99

Manual Handling (Firestop and Penetration Sealing)

Manual handling of mortar bags, batt cartons, fire-rated board, collars, sealant cartons, tools and access equipment across firestop and penetration sealing works.

$49.99

Penetration Survey, Register, Tagging & Certification

Surveying and numbering every penetration, gap and fire-rated element, setting up the register, photographing before and after, tagging each completed seal and issuing the as-built register and certificate.

$49.99

Service Penetration Sealing - Mortar, Batt & Sealant

Sealing pipe, cable, tray and conduit penetrations through fire-rated walls and floors with fire-rated mortar, mineral fibre batts and sealants - preparation, mixing, placing, finishing and curing to the tested system.

$49.99

Fire Collar & Wrap Installation

Installing fire collars, cast-in collars and intumescent wraps and pillows on plastic and insulated pipes, cable bundles and ducts through fire-rated walls and floors - selection to the tested system, fixing and finishing.

$49.99
$49.99/state

Select your state to purchase

Better value All 14 in the Firestop and Penetration Sealing pack $249.99 for all 14 See the pack →

GST-inclusive. Instant download. Tax invoice provided.

Last review: 9 September 2026

Editable .docx format

Need a safety document we don’t have?

Our catalogue covers 105 trades, but not every job fits one. If a principal contractor has asked for something specific, or the work you do is not in the list, we write it from scratch for your trade and your state. Same format as everything else here: editable Word, your state's Act and regulator, ready to put your details on. We can also brand your SWMS pack with your logo and company details. We’ll write it for you →