SWMS AUS

Temporary Electrical Connections (Electrical Combined HVAC and Solar)

Installation and management of temporary builders' supplies, distribution boards, leads and site lighting.

SWMS template. Editable Word document, written for your state, ready to adapt to the job.

Objective

Complete the work safely by controlling fatal shock from non-compliant or weather-damaged supply through licensed installation to AS/NZS 3012, residual current device (RCD) protection on every circuit and leads kept off the ground.

This is the Electrical Combined HVAC and Solar version. The hazards and controls are written around electrical combined hvac and solar work, so it differs from the other 2 trade versions of Temporary Electrical Connections. Compare all 3.

Your state's laws, in the document

Each state version references the Act, regulator, and requirements for the state you select. Victoria gets the OHS Act and WorkSafe Victoria, NSW gets the WHS Act and SafeWork NSW.

NSW WHS Act 2011 VIC OHS Act 2004 QLD WHS Act 2011 SA WHS Act 2012 WA WHS Act 2020 TAS WHS Act 2012 NT WHS (National Uniform Legislation) Act 2011 ACT WHS Act 2011 National Model WHS Act (national)

When you'd use this SWMS

If temporary electrical connections (electrical combined hvac and solar) is part of your job, the builder or head contractor will usually want a SWMS for it before you start on site. This one's editable in Word. Add your company and site details, check the hazards and controls against the actual job, and get your crew to sign on before work starts.

Not sure whether you need one? When a SWMS is required covers it, and the 18 high risk construction work categories are the list a principal contractor works from.

Doing the whole trade? The Electrical Combined HVAC and Solar pack bundles this with the rest and works out cheaper. New to it? Here's what goes in a SWMS.

Related SWMS

Ground-Based Solar Farm Installation

Installation of ground-mounted solar farms including pile driving, racking assembly, module installation, DC stringing, inverters and HV interface across large remote sites.

$49.99

UV Light Installation

Installation, testing and commissioning of UV-C disinfection lighting in HVAC ducts, plant and water treatment systems.

$49.99

Electrical, HVAC & Solar - Master SWMS

Master

Overarching SWMS for the full electrical, HVAC and solar scope where a dedicated task SWMS is not in place - mobilisation, isolation, cabling, switchboards, installation and renovation, HVAC and refrigerant, solar PV, height and roof work, overhead lines, hazardous substances and demobilisation.

$49.99

Service Location & Detection

Locating and marking underground services with electromagnetic and ground-penetrating radar methods before excavation, coring or drilling, so that following work does not strike electrical, gas, water, comms or sewer assets.

$49.99

New Electrical Installation

New electrical installations in buildings - rough-in, switchboards, cabling, fit-off and verification, including progressive energisation and work at height.

$49.99

Low Voltage Electrical Repairs & Installations

Low voltage (230/400V) repairs and installations including circuits, accessories, equipment connections and fault rectification.

$49.99
$49.99/state

Select your state to purchase

Better value All 40 in the Electrical Combined HVAC and Solar pack $249.99 for all 40 See the pack →

GST-inclusive. Instant download. Tax invoice provided.

Last review: 4 September 2026

Editable .docx format

Need a safety document we don’t have?

Our catalogue covers 105 trades, but not every job fits one. If a principal contractor has asked for something specific, or the work you do is not in the list, we write it from scratch for your trade and your state. Same format as everything else here: editable Word, your state's Act and regulator, ready to put your details on. We can also brand your SWMS pack with your logo and company details. We’ll write it for you →