Acoustic Louvre & Attenuator Installation

Acoustic and vibration control in plant rooms, roofs and occupied buildings - surveys, isolators and inertia bases, louvres and attenuators, linings and enclosures, floating floors, panels, duct lagging and pipe isolation.

Setting up in plant rooms, on roofs and in occupied buildings for acoustic works - access, laydown for panels, bases and isolators, crane and hoist positions, exclusion zones and setting out isolator and panel positions.

Manual handling of spring isolators, inertia base frames, acoustic panels, attenuators, lagging rolls, mass-loaded vinyl, tools and equipment across acoustic and vibration control works.

Noise and vibration measurement and site assessment before installation - readings in plant rooms, on roofs and in occupied spaces, structure and services checks at fixing positions, plant weights and access routes.

Installing spring and rubber isolators, anti-vibration mounts, hangers, restraints and inertia bases under fans, pumps, chillers and air handlers - positioning, jacking plant onto isolators, levelling and restraining.

Lining plant room walls, ceilings and doors with acoustic panels and absorbers and building acoustic enclosures around plant - framing, panel fixing, sealing, doors and access, while the plant room stays in service.