SWMS AUS

Concrete Scanning (Concrete Cutting and Core Drilling)

Scanning concrete structures with GPR or cover meter to locate reinforcement, post-tension strands, conduits and services before cutting or coring.

SWMS template. Editable Word document, written for your state, ready to adapt to the job.

Objective

Complete the work safely and accurately by locating embedded post-tension and services before cutting, since a missed target causes a strike, through calibrated scanning, conservative interpretation, clear marking and verification.

This is the Concrete Cutting and Core Drilling version. The hazards and controls are written around concrete cutting and core drilling work, so it differs from the other 1 trade versions of Concrete Scanning. Compare all 2.

Your state's laws, in the document

Each state version references the Act, regulator, and requirements for the state you select. Victoria gets the OHS Act and WorkSafe Victoria, NSW gets the WHS Act and SafeWork NSW.

NSW WHS Act 2011 VIC OHS Act 2004 QLD WHS Act 2011 SA WHS Act 2012 WA WHS Act 2020 TAS WHS Act 2012 NT WHS (National Uniform Legislation) Act 2011 ACT WHS Act 2011 National Model WHS Act (national)

When you'd use this SWMS

If concrete scanning (concrete cutting and core drilling) is part of your job, the builder or head contractor will usually want a SWMS for it before you start on site. This one's editable in Word. Add your company and site details, check the hazards and controls against the actual job, and get your crew to sign on before work starts.

Not sure whether you need one? When a SWMS is required covers it, and the 18 high risk construction work categories are the list a principal contractor works from.

Doing the whole trade? The Concrete Cutting and Core Drilling pack bundles this with the rest and works out cheaper. New to it? Here's what goes in a SWMS.

Related SWMS

Road Sawing

Flat sawing of roads, pavements and slabs with self-propelled and walk-behind road saws, including traffic interfaces, wet cutting, slurry control and joint sawing, so crews are protected from traffic and every cut is wet and scanned.

$49.99

Concrete Cutting & Core Drilling - Master SWMS

Master

Hand sawing, flat sawing, wall and wire sawing, core drilling and chasing of concrete where a task-specific SWMS does not apply.

$49.99

Wall & Wire Sawing

Track-mounted wall sawing and diamond wire sawing of concrete walls, beams and mass elements, including track anchoring, cut section support and controlled removal, so cut sections never fall uncontrolled and a snapped wire hits nobody.

$49.99

Manual Handling (Concrete Cutting and Core Drilling)

Manual handling of saws, core rigs, blades, cut sections and equipment during concrete cutting and core drilling work.

$49.99

Hazardous Substances (Concrete Cutting and Core Drilling)

Handling and storing the hazardous substances used in concrete cutting work, including alkaline cutting slurry, petrol and diesel fuels, exhaust carbon monoxide and cutting dust and silica, with asbestos awareness for in-situ materials.

$49.99

Site Establishment & Setout (Concrete Cutting and Core Drilling)

Setting up the cutting work area on the host site - access, exclusion, services check, amenities and unloading of plant and equipment.

$49.99
$49.99/state

Select your state to purchase

Better value All 12 in the Concrete Cutting and Core Drilling pack $249.99 for all 12 See the pack →

GST-inclusive. Instant download. Tax invoice provided.

Last review: 4 September 2026

Editable .docx format

Need a safety document we don’t have?

Our catalogue covers 105 trades, but not every job fits one. If a principal contractor has asked for something specific, or the work you do is not in the list, we write it from scratch for your trade and your state. Same format as everything else here: editable Word, your state's Act and regulator, ready to put your details on. We can also brand your SWMS pack with your logo and company details. We’ll write it for you →