Free guide

Asbestos removal SWMS: what it must cover and which licence applies

Last reviewed:

Disturbing asbestos during construction work is high risk construction work, so a Safe Work Method Statement (SWMS) must be prepared before the work starts. Which licence you need depends on whether the asbestos is friable or non-friable, and how much there is. In the ACT, removing any asbestos needs a licence.

The SWMS and the licence answer different questions. The licence says who may do the removal. The SWMS says how this job will be done safely. You need to get both right.

Why does asbestos work need a SWMS?

The model WHS Regulations list 18 categories of high risk construction work (HRCW). One of them is construction work that “involves, or is likely to involve, the disturbance of asbestos”. If your work falls into it, a SWMS must be prepared before the work starts.

“Likely to involve” matters. Drilling through an asbestos cement sheet, lifting old vinyl tiles or cutting into a pre-1990 eave can all disturb asbestos, even where removal is not the job. If the building’s asbestos register or an inspection shows asbestos where you are working, plan for it in the SWMS. For the general test, see do I need a SWMS?

Which licence applies?

Under the model WHS Regulations there are three asbestos licences (Safe Work Australia):

Friable asbestos is in powder form, or can be crumbled or reduced to powder by hand pressure when dry. Non-friable asbestos is bonded into a material such as cement sheet.

Asbestos licences are issued by each state and territory regulator, and Safe Work Australia notes they differ between jurisdictions. Contact the regulator where the removal is happening for the licence classes, conditions and training they require.

When is a licence not needed?

Safe Work Australia says that in some states and territories you may be able to remove asbestos without a licence, but only in these situations:

Even without a licence, you may need training in asbestos awareness and identification, and the model WHS Regulations require workers who may be exposed to be trained. The work is still HRCW, so the SWMS is still required. Over 10 square metres of non-friable asbestos needs at least a Class B licence, and friable asbestos needs Class A.

What must the SWMS cover?

A SWMS for asbestos work has to do what every SWMS does: identify the HRCW, state the hazards and risks, describe the control measures, and say how those controls will be implemented, monitored and reviewed. For asbestos work, that usually means:

Write it for this job and this site. A generic SWMS that does not match the material, location and method will not help on the day and is likely to be sent back. See how to write a SWMS and how to use a SWMS template.

Asbestos removal control plan, management plan and SWMS

Three documents get mixed up:

On a licensed removal you will usually have the control plan and the SWMS, and they should agree with each other. Licensed removalists must also notify the regulator in writing before the work starts, at least five days ahead under the model WHS Regulations.

What about Victoria?

Victoria is not under the model WHS laws. Asbestos work there is regulated under the Occupational Health and Safety Act 2004 and OHS Regulations 2017, by WorkSafe Victoria. Check its licensing, notification and removal requirements directly. See SWMS requirements by state.

Asbestos SWMS pack

The Asbestos trade pack includes 13 SWMS, covering Asbestos Awareness, Asbestos Safe Handling (Under 10sqm), Asbestos Licensed Removal, Painting Asbestos Roofs, Asbestos in Confined Spaces, Asbestos Transport and Disposal, and Asbestos in Soil & Contaminated Land. It is $249.99 per state, editable Word, one-off purchase.

If you also need the site-level plan, the Asbestos Management Plan is a separate $149 template. Neither replaces a licence, the asbestos removal control plan or a clearance certificate.

Asbestos dust is an airborne contaminant with its own exposure limit. See what are WES and WEL? For other dust plans, see what is a silica risk control plan?

Common questions

Do I need a SWMS to remove asbestos?

Under the model WHS Regulations, construction work that involves, or is likely to involve, disturbing asbestos is high risk construction work, so a Safe Work Method Statement (SWMS) must be prepared before it starts. That includes small jobs that do not need a licence.

What is the difference between a Class A and a Class B licence?

Under the model WHS Regulations, a Class A removalist can remove all types of asbestos, including friable asbestos. A Class B removalist can only remove non-friable asbestos. Licences are issued by your state or territory regulator.

Can I remove asbestos without a licence?

Only in limited situations, and not in the ACT. Safe Work Australia lists them as removing 10 square metres or less of non-friable asbestos, the dust and debris from that removal, or a minor contamination. You may still need training, and you still need a SWMS if it is construction work.

Is an asbestos removal control plan the same as a SWMS?

No. A licensed removalist must prepare an asbestos removal control plan for licensed work, setting out the method, equipment and the asbestos to be removed. The SWMS covers the high risk construction work. On a licensed job you will usually need both.

Is Victoria different?

Yes. Victoria regulates asbestos under its own OHS Regulations 2017, with WorkSafe Victoria as the regulator. Check the licensing and removal rules with WorkSafe Victoria before relying on the model rules.

Sources: Safe Work Australia—Asbestos WHS duties, Model Code of Practice: How to safely remove asbestos and Model WHS Regulations. General information only; asbestos licensing differs by state and territory, so confirm the rules with your regulator before starting work.

Start from a proper SWMS, not a blank page

State-specific, editable templates written for your state. Download instantly, then make it yours for the job and the site.

This guide is general information, not legal or safety advice, and does not guarantee compliance. Laws and site conditions vary, so always check your state regulator and have documents reviewed by a competent person.