SWMS AUS

Roof Edge Protection (Gutter Cleaning and Gutter Guard Installation)

Installing, altering and removing temporary roof edge protection for gutter and guard work, where the install and the strip are themselves the fall-exposed tasks.

SWMS template. Editable Word document, written for your state, ready to adapt to the job.

Objective

Control falls during the install, the alteration and the strip, when the guardrail that protects the work is not yet up or is coming down.

This is the Gutter Cleaning and Gutter Guard Installation version. The hazards and controls are written around gutter cleaning and gutter guard installation work, so it differs from the other 5 trade versions of Roof Edge Protection. Compare all 6.

Your state's laws, in the document

Each state version references the Act, regulator, and requirements for the state you select. Victoria gets the OHS Act and WorkSafe Victoria, NSW gets the WHS Act and SafeWork NSW.

NSW WHS Act 2011 VIC OHS Act 2004 QLD WHS Act 2011 SA WHS Act 2012 WA WHS Act 2020 TAS WHS Act 2012 NT WHS (National Uniform Legislation) Act 2011 ACT WHS Act 2011 National Model WHS Act (national)

When you'd use this SWMS

If roof edge protection (gutter cleaning and gutter guard installation) is part of your job, the builder or head contractor will usually want a SWMS for it before you start on site. This one's editable in Word. Add your company and site details, check the hazards and controls against the actual job, and get your crew to sign on before work starts.

Not sure whether you need one? When a SWMS is required covers it, and the 18 high risk construction work categories are the list a principal contractor works from.

Doing the whole trade? The Gutter Cleaning and Gutter Guard Installation pack bundles this with the rest and works out cheaper. New to it? Here's what goes in a SWMS.

Related SWMS

Gutter Cleaning & Gutter Guard Installation - Master SWMS

Master

Cleaning gutters, valleys and downpipes and installing gutter guard, leaf guard and ember guard on houses and commercial buildings, from ladders, roofs, platforms and the ground.

$49.99

Site Establishment & Gutter Assessment

Arriving, parking, setting up and assessing the building, the gutter, the roof, the service line and the ground before any ladder, pole or platform is raised.

$49.99

Handling Ladders, Vacuum Units, Guard Rolls and Debris

Handling ladders, gutter vacuum units, telescopic poles, hoses, guard bundles and debris bags by hand, on the ground and at height.

$49.99

Ladders & Height Access Equipment

Selecting, inspecting, setting up and working from ladders, step platforms, trestles, mobile scaffold and elevating work platforms for gutter work.

$49.99

Roof Access, Fragile Surfaces & Working at Height (Gutter Cleaning and Gutter Guard Installation)

Getting on and off a roof to reach a gutter, a valley or a box gutter, and moving about on the roof surface - pitch, fragile areas, weather and heat.

$49.99

EWP Operations (Gutter Cleaning and Gutter Guard Installation)

Using a scissor lift, a boom lift or a trailer-mounted platform to reach gutters, valleys and fascia lines from outside the building.

$49.99
$49.99/state

Select your state to purchase

Better value All 13 in the Gutter Cleaning and Gutter Guard Installation pack $249.99 for all 13 See the pack →

GST-inclusive. Instant download. Tax invoice provided.

Last review: 14 September 2026

Editable .docx format

Need a safety document we don’t have?

Our catalogue covers 105 trades, but not every job fits one. If a principal contractor has asked for something specific, or the work you do is not in the list, we write it from scratch for your trade and your state. Same format as everything else here: editable Word, your state's Act and regulator, ready to put your details on. We can also brand your SWMS pack with your logo and company details. We’ll write it for you →