Crane and Lifting SWMS Pack
The SWMS Aus Crane and Lifting SWMS Pack is 14 state-specific Safe Work Method Statements for crane and lifting work in Australia (one Master SWMS and 13 task-specific SWMS) plus 14 SOPs, for $249.99 GST-inclusive per state. It covers mobile, tower, self-erecting, truck-mounted and mini cranes, hoists, dogging, lift planning, crane-suspended workboxes and work near overhead powerlines, with each edition referencing the Act and regulator for the state you choose.
Your state's laws, in the document
Each state version references the Act, regulator, and requirements for the state you select. Victoria gets the OHS Act and WorkSafe Victoria, NSW gets the WHS Act and SafeWork NSW.
Master SWMS
Full ScopeIncludes one overriding Master SWMS covering the full trade scope, plus task-specific SWMS for detailed work.
Task-Specific SWMS (13)
Detailed SWMS for specific tasks within the crane and lifting scope.
When you'd use the Crane and Lifting pack
Most builders and head contractors want a SWMS off every subbie before you set foot on site, even when the work isn't strictly high-risk. So if you're doing crane and lifting work, you'll almost always get asked for one. Buy the pack to cover the trade in one hit, or grab the individual SWMS you're short on.
Bought a pack already? What to do next. New to it? Here's what goes in a SWMS and why we write them per state.
When is a SWMS required for crane work?
A SWMS is required before high risk construction work starts. Under the WHS Regulations, high risk construction work is defined in reg 291 and the SWMS requirement sits in reg 299. In Victoria the equivalent requirement is in the OHS Regulations 2017.
Crane and lifting work often falls into that category because it can involve the movement of powered mobile plant, work on or near energised electrical installations or overhead powerlines, or a risk of a person falling more than 2 metres. Whether a particular task needs one depends on the work itself, so not every crane task is automatically high risk construction work.
The SWMS are written with AS 2550 (safe use of cranes) and AS 1418 (crane design) in mind. They do not replace those standards, and using them does not on its own make the work compliant with them.
Common questions
What's in the Crane and Lifting pack?
14 SWMS, including one Master SWMS and 13 task-specific SWMS, plus 14 SOPs. They're editable Word files, written for the state you pick.
When is a SWMS required for crane work?
A SWMS is required before high risk construction work starts. Under the WHS Regulations, high risk construction work is defined in reg 291 and the SWMS requirement sits in reg 299. In Victoria the equivalent requirement is in the OHS Regulations 2017. Crane and lifting work often falls into that category because it can involve the movement of powered mobile plant, work on or near energised electrical installations or overhead powerlines, or a risk of a person falling more than 2 metres. Whether a particular task needs one depends on the work itself, so not every crane task is automatically high risk construction work. The SWMS are written with AS 2550 (safe use of cranes) and AS 1418 (crane design) in mind. They do not replace those standards, and using them does not on its own make the work compliant with them.
Which state do I choose?
The one you're working in. Each version references that state's laws and regulator, so the NSW doc points to the WHS Act and SafeWork NSW, and the Vic one to the OHS Act and WorkSafe Victoria. Working across a few states? Go with National.
Do I still have to fill it in?
Yeah, and it's more than filling in the blanks. The common hazards, controls, PPE and legislation for the trade are already there, so you're not starting from scratch. Your part is to read it against the actual job: add the hazards on that site, anything specific to how your business works, and take out what doesn't apply. Then the crew signs on before work starts. A competent person has to be satisfied it suits the work being done.
Can I add my logo and edit it?
It's a Word doc, so drop your logo and details in and change whatever you want. Once you buy it, it's yours to reuse on your jobs.
Crane and Lifting Pack
14 SWMS templates
14 editable SWMS for $249.99, about $17.86 each
GST-inclusive. Instant download. Tax invoice provided.
Questions before you buy?
1300 952 806|[email protected]
Last review: 18 November 2026
Safe Operating Procedures for equipment and tasks, valued at $99.99, FREE with this pack
- Forklift
- Vehicle Loading Crane (Hiab)
- Materials Hoist
- Elevated Work Platform (EWP) - Scissor Lift
- Elevated Work Platform (EWP) - Boom Lift
- Manual Handling - Team Lifting
- Chain Block - Lever Hoist
- Slings, Shackles and Lifting Gear
- Crane Lift - Rigging (Dogging)
- Fuel Storage and Refuelling
- Spill Response & Spill Kit Use
- Crane-Suspended Work Box
- Mobile and Mini Crane Operation
- Overhead Gantry Crane (Factory)
Scroll to see all 14 SOPs
These SWMS also come inside the Crane and Lifting All-In WHS Pack
Same documents, with the system they belong to around them: the policies, procedures and registers that describe how the business runs, the project and site layer you apply to each job, and the training and competency records behind your people. Worth a look if your safety documents were collected over time and do not reference one another.
Need a safety document we don’t have?
Our catalogue covers 105 trades, but not every job fits one. If a principal contractor has asked for something specific, or the work you do is not in the list, we write it from scratch for your trade and your state. Same format as everything else here: editable Word, your state's Act and regulator, ready to put your details on. We can also brand your SWMS pack with your logo and company details.We’ll write it for you →