Avetta asks Australian contractors for insurance certificates, prequalification forms and, for higher risk work, a manual audit of their written work health and safety (WHS) system: policies, procedures, Safe Work Method Statements (SWMS) and records.
A client sends you an invitation: register with Avetta and meet their requirements before you start work. Below is how the process works, what Avetta usually asks Australian suppliers for, the document rules behind most rejections, and where to find each document in an All-In WHS Pack.
SWMS Aus is not affiliated with Avetta. The client who invites you sets the actual requirements, so check their list in your Avetta account before you upload anything.
How does Avetta prequalification work?
Avetta is a supplier and contractor management platform. A client connects you to its account, and you complete that client's requirements inside Avetta.
- Prequalification forms. You fill in prequalification question forms and upload documents such as licences, acknowledgements and certifications (Avetta).
- Insurance. You upload certificates of currency, and Avetta checks them against the client's insurance requirements.
- Manual audit. Depending on the risk of the work, you may have to go through a manual audit, where an Avetta auditor reviews your written safety documents (Avetta, Yara Pilbara registration).
Avetta's guidelines for a successful manual audit describe it as a comprehensive review of your company's written safety manual, policies, procedures and safe work practices. It covers your whole operation, not one client or one project. The process, as Avetta sets it out:
- You complete a pre-questionnaire that identifies your work types and collects your documents.
- An auditor reviews the documents against the requirements.
- If there are gaps, the audit comes back to you with open requirements, and you upload more. This can repeat as many times as needed.
- Once every requirement is addressed, the audit is marked complete.
- The manual audit is repeated every 3 years.
Avetta charges suppliers an annual membership, and one client's Avetta page notes that connecting to more clients may increase it. Check the current fee in your own account.
What do they ask for?
Every client has its own list, but you will see most of these.
- Insurances. Certificates of currency for public and product liability and workers compensation, and sometimes professional indemnity and vehicle insurance.
- Licences and registrations. Your trade or contractor licence and any other licences or certifications the client asks for.
- WHS policies. One client's Avetta page lists health, environment, safety and quality (HESQ) policies among the documents for verification.
- WHS procedures. The same page lists risk management, health and fitness for work, emergency management, training and competency management, and systems of work including incident management.
- Psychosocial safety, fatigue and injury management. Avetta says all Australian suppliers must address the psychosocial safety and the fatigue and injury management parts of the manual audit.
- Electrical safety, if you engage electricians. These suppliers must address the qualified electrical and arc flash safety part.
- A safety management plan, if you work for mining clients. Avetta says Australian suppliers linked to mining clients must provide a generic overarching safety management plan.
- SWMS and safe work practices. The manual audit reviews your written safe work practices along with the policies and procedures.
- Client-specific documents. Avetta says these may be requested directly by the client at the site, separately from the audit.
Avetta cannot provide templates. Its auditors can give guidance and point you to the regulator.
The document rules Avetta checks
Before an auditor reads what your document says, they check the document itself. Avetta's conformance requirements for the manual audit are:
- dated within the past 3 years, with the revision date on the front page, in a revision section or in the footer, and not in the future
- on company letterhead that matches the company name on the Avetta account
- a final version, with no template or draft marks
- Word or PDF format
- SWMS must not reference client or project specific information
- current Australian legislative references.
That is the reverse of a builder's site SWMS. For the Avetta audit, upload the generic company version. If you have no formal procedure for something, Avetta accepts a dated, signed statement on company letterhead explaining how you manage it.
Where each one sits in an All-In WHS Pack
Here is where each one is in an All-In WHS Pack. A few codes differ between trades, but the layout does not.
| What they ask for | In the pack |
|---|---|
| WHS policy | POL-001 Health and Safety Policy |
| Fitness for work, drugs and alcohol, fatigue | POL-005, POL-002, POL-004 |
| Psychosocial safety | POL-008 Psychosocial Hazard Management Policy, POL-009 Workplace Bullying Harassment and Sexual Harassment Prevention Policy, plus the psychosocial procedure and forms |
| Injury management and return to work | POL-006 Return to Work and Injury Management Policy |
| Description of the WHS system | PLN-001 WHS Manual (in Victoria, the occupational health and safety (OHS) Manual) |
| Risk management | PRO-004 Risk and Hazard Management Procedure |
| Incident management | PRO-003 procedure, FOR-003 investigation form, REG-003 register |
| Training and competency | PRO-002 procedure, REG-002 Training Records Register, verifications of competency (VOCs) |
| Emergency management | PLN-002 Emergency and Evacuation Plan, PRO-005 Emergency Response Procedure |
| Managing your own subcontractors | PRO-006 Procurement and Subcontractor Management Procedure, FOR-007 evaluation form, REG-005 register |
| Plant and equipment | PRO-007 procedure, REG-007 Equipment Register, pre-start inspections |
| Electrical isolation (electrical trades) | Electrical Isolation and Lock-Out Tag-Out Procedure and Isolation and Lockout Record, in the electrical trade packs |
| Hazardous chemicals and safety data sheets (SDS) | REG-006 SDS and Hazardous Substances Register |
| Licences and insurances on file | REG-014 Licences Registrations and Insurances Register |
| Inspections and audits | FOR-006 Workplace Inspection Form, FOR-002 Internal Audit Form |
| SWMS for your activities | The full SWMS set for the trade, plus standard operating procedures (SOPs) and job safety analyses (JSAs) |
The pack cannot give you insurance certificates, licences or tickets. Your broker, your licensing body and your workers have those. Put the expiry dates in REG-014 so nothing lapses between audits.
Why do submissions get sent back?
When something is missing, the auditor raises an open requirement. Avetta lists these common reasons:
- Document not found. The wrong document, or none, against the question.
- Incorrect company name. The name on the document does not match the account.
- Incorrect document formatting. Not Word or PDF, or it contains external links.
- Not a comprehensive program. It does not cover the categories that apply, or includes content that does not.
- Not a final version. Tracked changes, notes or draft marks are still showing.
- Review or revision date. No current date, or the date is more than 3 years old.
- Requirement not met. The content does not answer the audit question or the jurisdiction's requirements.
If a category does not apply to you, Avetta accepts a dated, signed clarification letter, or a comment in the audit form giving the reason. "N/A" on its own is not enough.
How to prepare before the invitation arrives
If the system is already set up, the manual audit is mostly uploading. If it is not, you are writing procedures against the client's deadline.
- Get the system in place. Start from an editable WHS management system for your trade and state.
- Make it yours. Put your business name on every document, matching your Avetta account exactly. Delete what you do not do and add what is particular to how you work.
- Clear the template marks. Remove guidance notes, placeholder text, tracked changes and external links, and save final versions as Word or PDF.
- Date and sign it. Add a revision date to every document, and have the owner or director sign and date the policies.
- Keep SWMS generic for the audit. Upload the company version. Keep the site-specific versions for the client on site.
- Cover the Australian extras. Psychosocial safety, fatigue, and injury management and return to work, plus electrical safety if you engage electricians.
- Collect the external documents. Current certificates of currency, licences and tickets, with the expiry dates in the register.
Which pack do you need?
If a client only wants SWMS for the job, a SWMS trade pack covers it. For an Avetta manual audit, they want the management system, which is what an All-In WHS Pack is: the policies, procedures, registers, forms, project documents, SWMS, SOPs, JSAs, VOCs and toolbox talks for one trade, written for your state.
Each trade comes in two editions, priced per state:
- Standard edition, $999. Covers the policy, procedure and record requests above.
- ISO 45001 edition, $1,499. Adds the documents an International Organization for Standardization (ISO) 45001 structure expects, such as internal audit, corrective action and management review, for a client who asks for an ISO 45001-structured system or a business working toward certification. It is aligned to ISO 45001:2018 but does not make a business certified; certification follows an external audit by an accredited certification body.
For example, see the Residential Builder, Electrical Work General, Civil Works or Earthmoving and Mobile Plant All-In WHS Packs. For the other prequalification platforms, see Cm3 and HammerTech prequalification documents, and for policies, see what are workplace policies.
Start from a proper SWMS, not a blank page
State-specific, editable templates written for your state. Download instantly, then make it yours for the job and the site.
This guide is general information, not legal or safety advice, and does not guarantee compliance. Laws and site conditions vary, so always check your state regulator and have documents reviewed by a competent person.
