Free guide

Cm3 and HammerTech prequalification: the documents you need

Last reviewed:

A head contractor sends an email: complete your prequalification on Cm3, or register your company in HammerTech, before you start on site. Either way, they want to see that your business has a work health and safety (WHS) system and that it gets used. Below is what they usually ask for, the reasons submissions bounce, and where to find each document in an All-In WHS Pack.

SWMS Aus is not affiliated with Cm3 or HammerTech. The client who invites you sets the actual requirements, so check their list before you upload anything.

How is Cm3 different from HammerTech?

Cm3 is a prequalification service. A client invites you, you complete a Business Risk Profile describing the work you do, and you upload evidence against each element of a WHS management system. A Cm3 assessor then checks that evidence against the risks you selected and sends feedback until it meets the standard. Your insurances are submitted and checked as part of the same process. Cm3 also runs a stricter assessment for businesses acting as principal contractor.

HammerTech is a site safety platform that head contractors run their projects on. Subcontractors get their own portal, which HammerTech says is free for subcontractors. In it they keep company details, insurances, safety documents and worker information, and submit Safe Work Method Statements (SWMS) for the builder to review and approve. Each builder configures their own prequalification questions, so two builders on HammerTech can ask for different things. Nearly all of them will want your insurances, plus whatever else applies to your trade: contractor and high-risk work licences, white cards, plant registrations, and any accreditation the job calls for.

So with Cm3, someone outside the builder marks your submission, and you keep it up to date for that client. With HammerTech, the builder's own safety team looks at it, and you keep your documents current there for each job you do with them.

What do they ask for?

Every client has their own list, but you will see most of these on it.

Where each one sits in an All-In WHS Pack

Here is where each one is in an All-In WHS Pack. A few codes differ between trades, but the layout does not.

What they ask forIn the pack
WHS policyPOL-001 Health and Safety Policy
Drug and alcohol, fatigue, fitness for workPOL-002, POL-004, POL-005
Psychosocial and harassment policiesPOL-008, POL-009, plus the psychosocial procedure and forms
Description of the WHS systemPLN-001 WHS Manual (in Victoria, the occupational health and safety (OHS) Manual)
Risk management procedurePRO-004 Risk and Hazard Management Procedure
Incident reporting and investigationPRO-003 procedure, FOR-003 investigation form, REG-003 register
Training and competencyPRO-002 procedure, REG-002 Training Records Register, VOCs
Worker consultationPRO-012 Worker Consultation and Participation Procedure, toolbox talk records
Managing your own subcontractorsPRO-006 Procurement and Subcontractor Management Procedure, FOR-007 evaluation form, REG-005 register
Emergency proceduresPLN-002 Emergency and Evacuation Plan, PRO-005 Emergency Response Procedure
Plant and equipmentPRO-007 procedure, REG-007 Equipment Register, pre-start inspections
Test and tag and residual current device (RCD) registerREG-011 Test and Tag and RCD Register
Hazardous chemicals and safety data sheets (SDS)REG-006 SDS and Hazardous Substances Register
Licences and insurances on fileREG-014 Licences Registrations and Insurances Register
Inspections and auditsFOR-006 Workplace Inspection Form, FOR-002 Internal Audit Form
Company inductionFOR-008 Company Induction Form
SWMS for your activitiesThe full SWMS set for the trade, plus standard operating procedures (SOPs) and job safety analyses (JSAs)
Site-specific WHS planPLN-P01 Project WHS Management Plan (Project OHS Management Plan in Victoria) and the project forms

The pack cannot give you insurance certificates, licences or tickets. Your broker, your licensing body and your workers have those. Put the expiry dates in REG-014 so nothing lapses mid-job.

Why do submissions get sent back?

Nearly always one of these.

How to prepare before the invitation arrives

If the system is already set up when the email lands, prequalification is an afternoon of uploading. If it is not, you are writing policies against the builder's deadline.

  1. Get the system in place. Start from an editable WHS management system for your trade and state.
  2. Make it yours. Put your business name, ABN, people and contact details through every document. Delete the SWMS and procedures for work you do not do, and add anything that is particular to how you work.
  3. Sign the policies. The owner or director signs and dates them and puts in a review date.
  4. Start the records. Do an induction, a toolbox talk and a site inspection, and fill in the registers. A few weeks of completed forms shows the system is in use.
  5. Collect the external documents. Current certificates of currency, licences and tickets, with the expiry dates in the register.
  6. Keep it all in one folder. Policy, procedures, registers, SWMS, insurances, licences. The next invitation is then mostly uploading.

Which pack do you need?

If a builder only wants SWMS for the job, a SWMS trade pack covers it. If it is prequalification, they want the management system, which is what an All-In WHS Pack is: the policies, procedures, registers, forms, project documents, SWMS, SOPs, JSAs, VOCs and toolbox talks for one trade, written for your state.

Each trade comes in two editions. The Standard edition covers the prequalification requests above. The ISO 45001 edition adds the documents that structure expects, for a client who asks for an ISO 45001-structured system or a business working toward certification. For more on policies or SWMS, see those guides.

Start from a proper SWMS, not a blank page

State-specific, editable templates written for your state. Download instantly, then make it yours for the job and the site.

This guide is general information, not legal or safety advice, and does not guarantee compliance. Laws and site conditions vary, so always check your state regulator and have documents reviewed by a competent person.