Waterproofing SWMS Pack

Establishing the waterproofing work area including induction, exclusion zones, laydown, chemical storage and services identification.

Manual handling of membrane rolls, drums of primer and membrane, tools and equipment during waterproofing works.

Grinding, scabbling and cleaning concrete and screed substrates to remove laitance, coatings and contaminants ready for priming and membrane application.

Priming and applying waterproofing membranes to internal wet areas including showers, bathrooms and laundries in accordance with AS 3740.

Applying primers and membranes to balconies, terraces and external above-ground surfaces in accordance with AS 4654.

Applying tanking membranes to below-grade walls, retaining walls, lift pits and basement structures within excavations.

Heating and bonding torch-on bituminous membranes using LPG-fired torches, including hot work permits, gas cylinder management and fire watch.

Mixing and applying liquid-applied membranes, primers and two-pack polyurethane and epoxy coatings by roller, brush or trowel.

Investigating failed waterproofing, removing old membranes and substrates, and sealing active leaks using pressure injection of polyurethane and epoxy resins.

Waterproofing planter boxes, podium slabs and trafficable roof decks including detailing of upturns, penetrations and drainage outlets.

Waterproofing works at heights on the structure including roof edges, balconies, facades and lift shafts using scaffolds, EWPs, edge protection and fall arrest equipment.

Carrying out waterproofing works inside occupied private residences including bathroom renovations, balcony repairs and remedial leak work.

Storing, handling, mixing and disposing of solvents, primers, membranes and two-pack chemical products used in waterproofing works.