Free guide

ISO 45001:2018 explained for contractors

Last reviewed:

ISO 45001:2018 is the international standard for an occupational health and safety (OH&S) management system. It sets requirements for how a business plans, runs, checks and improves its safety management. Certification is optional and is done by an independent certification body after an audit, but larger government and principal contractor work often asks for it.

The standard is published by the International Organization for Standardization (ISO). In Australia it is adopted as a joint Australian and New Zealand Standard (AS/NZS), AS/NZS ISO 45001:2018, which replaced the older AS/NZS 4801:2001. This guide explains what the standard asks for in practical terms, when contractors get asked for it, how certification works, and where a set of templates helps and where it does not.

What is ISO 45001:2018?

ISO describes ISO 45001 as a standard that specifies requirements for an OH&S management system, providing a framework for organisations to manage risks and improve OH&S performance. It sets criteria for an OH&S policy, objectives, planning, implementation, operation, auditing and review. ISO lists its key elements as leadership commitment, worker participation, hazard identification and risk assessment, legal and regulatory compliance, emergency planning, incident investigation and continual improvement.

It uses a Plan-Do-Check-Act approach:

ISO says the standard applies to organisations of any size and can be integrated with its other management system standards, such as ISO 9001:2015 (quality) and ISO 14001:2015 (environmental). A business running all three together often calls it an integrated health, safety, environment and quality (HSEQ) system. See using these templates in your HSEQ or ISO system.

How is it different from a work health and safety management system?

A work health and safety (WHS) management system is the set of policies, procedures, records and practices a business uses to manage safety. Every business has to manage WHS risks under the law, but no Australian WHS law requires a business in general to follow ISO 45001 or to be certified to it. The main legal exception is licensing: in some jurisdictions a Class A asbestos removal licence requires a certified safety management system, and New South Wales, Western Australia and Tasmania define that system by reference to ISO 45001:2018 (or an equivalent determined by the regulator). Queensland and some other jurisdictions still refer to AS 4801:2001 for that licence condition.

ISO 45001 is a particular way of structuring that system, with defined requirements that an auditor can check. A WHS management system aligned to ISO 45001:2018 is organised so that each requirement of the standard has a matching part of the system. See what is a WHS management system?.

When are contractors asked for ISO 45001?

Mostly when tendering for larger government work, or when a principal contractor's prequalification asks for it. Some examples from current government documents:

Smaller council and builder questionnaires often ask whether you are certified, and if you are not, ask you to show your WHS system instead. See council and government tender prequalification.

How does certification work?

ISO's own explanation is the clearest place to start:

Each certification body sets its own process, so ask yours. In general, the path looks like this:

  1. Build the system. Policies, procedures, registers and forms that cover what the standard requires, adapted to how the business actually works.
  2. Run it. Use it on real jobs long enough to produce records: inductions, inspections, incidents, corrective actions, consultation, training.
  3. Check it yourself. ISO 45001 includes internal audit and management review. Run both and fix what they find. At the first stage of the certification audit, the certification body checks whether internal audits and management reviews are being planned and carried out.
  4. Choose a certification body. ISO suggests comparing several certification bodies, checking that the body follows the relevant conformity assessment (CASCO) standard, and checking whether it is accredited. In Australia, accredited bodies are listed on the JAS-ANZ register.
  5. Audit. The initial certification audit has two stages: stage 1 reviews the documented system and whether the business is ready, and stage 2 checks that the system is implemented and working. If the certification body is satisfied, it issues a certificate.
  6. Keep it running. Certification runs on a three-year cycle, with surveillance audits in the first and second years after certification and a recertification audit in the third year, before the certificate expires.

The records in step 2 are what make the difference. An auditor wants to see that the system is used, not just that it is written down. SWMS Aus does not certify businesses or carry out certification audits.

What does a contractor's system need to include?

Without reproducing the standard (it is a paid ISO publication), a contractor's system aligned to ISO 45001:2018 typically needs to cover:

What a certification audit looks for in a small business

Small contractors are often surprised that the hard part is not the documents. Based on how the standard is structured, an auditor will typically want to see:

A system that exists only on paper will usually show up quickly in the records.

Where do templates fit?

Templates save you writing the system from scratch. They do not make a business certified, and they do not replace the records that only come from using the system.

Our WHS Management System ISO 45001:2018 template set is 121 documents in editable Word and Excel, in four sections: a core system (policies, procedures and registers), a project and site layer, safe work documents, and an ISO 45001 Document Mapping that shows how the system maps to the standard, clause by clause. It includes procedures such as Internal Audit, Management Review, Compliance Evaluation, Corrective and Preventive Action, and Monitoring and Measurement, with the forms and registers they feed.

It is aligned to ISO 45001:2018. It does not make a business certified. Certification follows an audit by a certification body (government buyers usually want one accredited by JAS-ANZ), and the system has to be adapted to the business, implemented and kept up by the business itself.

If you work in one trade and want the system and the trade's safety documents in one place, the All-In WHS Packs come in an ISO 45001 edition as well as a Standard edition.

Common questions

What is ISO 45001:2018?

ISO 45001:2018 is the international standard for an occupational health and safety (OH&S) management system. It sets requirements for a safety policy, objectives, planning, implementation, operation, auditing and review, based on a Plan-Do-Check-Act approach. In Australia it is adopted as AS/NZS ISO 45001:2018.

Is ISO 45001 certification mandatory in Australia?

No Australian WHS law requires ISO 45001 certification for businesses in general. It is often required by contract (for example some government construction prequalification). A narrower legal exception is that some jurisdictions require a certified safety management system, defined by reference to ISO 45001:2018, as a condition of a Class A asbestos removal licence.

Who certifies a business to ISO 45001?

Independent third-party certification bodies, after an audit. ISO itself does not certify businesses. Government buyers in Australia usually ask for certification through a body accredited by the Joint Accreditation System of Australia and New Zealand (JAS-ANZ).

Did ISO 45001 replace AS/NZS 4801?

Yes. The NSW Government's construction WHS guidelines note that AS/NZS ISO 45001:2018 replaced AS/NZS 4801:2001, and contractors certified to AS/NZS 4801 were given until March 2021 to transition.

Can templates make my business ISO 45001 certified?

No. Templates can give you a documented system aligned to ISO 45001:2018, but certification only follows an audit by a certification body, and the auditor will want to see that the system is used, with records to show it.

Sources: International Organization for Standardization, ISO 45001:2018 Occupational health and safety management systems, Standards Australia, AS/NZS ISO 45001:2018, NSW Government, Work Health and Safety Management Guidelines for Construction, Edition 6 (December 2019), Business Queensland, Prequalification (PQC) checklist, Main Roads Western Australia, Specification 203 Health and Safety Management, ISO, Certification, ISO/IEC 17021-1:2015, section 9 (audit programme and two-stage initial audit), as summarised by the International Accreditation Service and JAS-ANZ register of accredited bodies.

Start from a proper SWMS, not a blank page

State-specific, editable templates written for your state. Download instantly, then make it yours for the job and the site.

This guide is general information, not legal or safety advice, and does not guarantee compliance. Laws and site conditions vary, so always check your state regulator and have documents reviewed by a competent person.